• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 285CD

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jon1212

Riff Raff Fart Knocker from other Forum's.
Joined
Feb 17, 2011
Messages
11,194
Reaction score
14,499
Location
Spanish Fork, Utah
I am looking to pare down the number of saws on my garage shelves.
This saw starts, runs, idles, and oils as it should. I replaced the worn spur set up with a new rim set up. It also has a new carb kit, fuel line, filter, and carb inlet elbow(the old one was cracked). I also found new guide plates for it.
As you can see in the pictures, it isn't a shelf queen, and has two pieces out of the front of the cylinder cover. Though from the lack of paint wear, it doesn't appear to have seen all that much use.
I would like to get $250/shipped to the lower 48 States via FedEx, Power head only.
20150123_174402(1).jpg 20150123_174418.jpg 20150225_090255(1).jpg 20150225_090231.jpg 20150225_090317(1).jpg
 
Put me first in line for this. I just have to clear it with SWMBO tonight when I get home. Whats compression? Any idea if its OEM inside? Any visable piston scoring on the exhaust side?
 
I'll check this afternoon, and let you know on the compression, and I'll get a picture of the top end from the exhaust side. The saw is all OEM.
 
Take the pictures of that thing down. You guys are killing me with all this vintage stuff. How's it run? I assume fine.
 
Put me first in line for this. I just have to clear it with SWMBO tonight when I get home. Whats compression? Any idea if its OEM inside? Any visable piston scoring on the exhaust side?

20150303_145930.jpg
I'm at 4500' in elevation.
 
Back
Top