• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 288 Back up for sell

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ronie

Addicted to ArboristSite
AS Supporting Member.
Joined
Dec 21, 2017
Messages
1,282
Reaction score
1,438
Location
NC
I put this together a few months ago and have only made some test cuts with it. It has a New, lightly ported, Hyway brand cylinder with a Meteor piston. New parts are as follows, OEM carburetor, tank, clutch cover, top cover, oil pump o ring. Aftermarket Hyway seals and Rotery fuel line. The only problem that I know of is that the starter slips sometimes and it probable needs a new starter paw spring or two. I don't have any time on it except for testing it out, because of that and the Hyway cylinder it's sold as is. $400 + shipping Power head only
 

Attachments

  • KIMG0350.JPG
    KIMG0350.JPG
    1.4 MB · Views: 59
  • KIMG0349.JPG
    KIMG0349.JPG
    1.4 MB · Views: 60
  • KIMG0348.JPG
    KIMG0348.JPG
    1.2 MB · Views: 58
  • KIMG0342.JPG
    KIMG0342.JPG
    1.1 MB · Views: 60
  • KIMG0337.JPG
    KIMG0337.JPG
    678.5 KB · Views: 57
  • KIMG0330.JPG
    KIMG0330.JPG
    1 MB · Views: 53
  • KIMG0294.JPG
    KIMG0294.JPG
    1 MB · Views: 51
  • KIMG0295.JPG
    KIMG0295.JPG
    603.5 KB · Views: 51
I put this up and quickly took it down so I could order some starter pawl springs. I ordered and received the paw springs but it stopped slipping so I didn't put them on. They will be sent with the saw in case it starts slipping. I'll try and get up a fresh video of it running today.
 
Back
Top