Just curious what is out there for original edition (45cc) saws? Doesn't have to be a shelf queen, a runner is fine too. Also interested in 345 or 350.
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Sold Husqvarna 346 OE, 345, or 350
- Thread starter svk
- Start date
Help Support Arborist Forum:
cuinrearview
Red saw lover
If you felt like building one I know a guy selling a 351. You can still get OEM pistons and cylinders.
cuinrearview
Red saw lover
If mine doesn't move soon I'm going to build it myself. I hadn't considered doing it OE. Would be interesting to run side by side with the NE 2149.
If I am building one it would need to be pretty cheap as I need to add the cost of OE p+c but I would consider it
cuinrearview
Red saw lover
Lol, "cheap" and "346xp" are rarely spotted together.
cuinrearview
Red saw lover
A few months ago I was talking to a guy that lives up Brett's way about a 351. It was a "project" and the guy still wanted $200 for it.
Totally understand. I wouldn't be against doing a 345/350 converted to the XP top end either.
cuinrearview
Red saw lover
I just texted the guy from GR. Maybe he still had it and wants to move it. I will let you know if I hear anything.
Much appreciated!
cuinrearview
Red saw lover
Congratulations. You just broke whatever site that is on.NE, but.....Cheap?
Unless it's toasted inside that saw must be long gone!
cuinrearview
Red saw lover
This would be a good start. And cheap
http://m.ebay.com/itm/Jonsered-CS21...handle-fuel-tank-etc-/282440283062?nav=SEARCH
http://m.ebay.com/itm/Jonsered-CS21...handle-fuel-tank-etc-/282440283062?nav=SEARCH
This is a 346 cylinder and piston on a 350 frame. I have opened the muffler and advanced the timing a little. Cuts like a big dog but not cheap. Mike
What's not cheap?
The "Big Dog"
Which big dog
.
Which big dog
350, 351 w/ 346 top end ported or fiddled with probably the least expensive way to go
Or maybe 345 w/ 346 top end
