Brent Adams
ArboristSite Operative
Saw runs for a little bit then starts starving for fuel. Primer suction line is empty. I can loosen the gas cap, tighten it back, and it primes and starts back.
Working on it for a guy. This is the problem he was having. Found the clamshell to plastic was leaking under pressure test. Intake boot was loose. I clipped off the plastic clip and put a screw clamp on it. Passed pressure and vac tests after that.
Working on it for a guy. This is the problem he was having. Found the clamshell to plastic was leaking under pressure test. Intake boot was loose. I clipped off the plastic clip and put a screw clamp on it. Passed pressure and vac tests after that.