Sold Husqvarna 351

[Spring1898]

Spring is coming, and with warm weather comes a change in hobbies.

Listing a couple extra projects that I may not get to. All described to the best of my ability and appear to be good mechanically. They have all at least been test run. Cosmetics as seen in the pictures.

For the 2149 and the 351 (Same magnesium case as the 346 and 353 for those who don't know), I will "upgrade" the P/C to an OEM NE 346xp top end for $100 more, or the Hyway 45mm Big Bore Pop up for $75 more.

SOLD - $250 - Jonsered 2149
Pretty clean, cracks in the top cover, rear clasp is replacement OEM but missing the hook so it is not attached. All OEM.

 

[Spring1898]

SOLD- $400 - 262xp All OEM, Mahle top end.
Squish measures 0.016" as I received it, compression is thus very healthy.


SOLD - $200 - Husky 55 (PHO, the bar was on it just for test running)
Pretty clean cosmetically. No +++++'s so I believe it is an open port, does have a base gasket delete

 

[Spring1898]

SOLD - $375 - 351 with OEM NE 346xp Top End.
Top End is basically like new, pretty conservatively tuned. Top cover has a hole in it and muffler is ported style. No base gasket delete, squish was around 0.023" if I remember correctly. If I find an extra top cover clasp, I will throw it in.



$250 - 351 "marked" by the original owner. I was planning on converting this one to be the go to 50cc saw where I wouldn't have to worry about cosmetics. Still might if it gets no hits. But really aside from the markings it is in very good shape.
Test run before pulling it apart, so it is mocked up for the pictures to see the condition.

It is a complete saw, so I can either put it back together with the original top end, or add the $100 for the conversion to a NE 346xp top end or $75 for the Hyway Big Bore version.

 

[Spring1898]

262 is sold

 

[Spring1898]

Bump to top

 

[cuinrearview]

No luck on Ebay?

 

[Spring1898]

Bump to top
Only 2 left