• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 359 running project

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ronie

Addicted to ArboristSite
AS Supporting Member.
Joined
Dec 21, 2017
Messages
1,282
Reaction score
1,438
Location
NC
Pretty nice looking Husqvarna 359. I had planed on going through it but picked up a 2159 and don't need two of the same saw. It was leaking oil from the oil line where it goes into the case and I put a little Hondabond on it for a temporary fix. It's a little hard starting but seems to run good once started. I'm listing this as a project because I haven't had a chance to go through it. I will get get a pic of the piston and do a compression check sometime today. $225 + shipping
 

Attachments

  • KIMG0114.JPG
    KIMG0114.JPG
    1.8 MB · Views: 62
  • KIMG0116.JPG
    KIMG0116.JPG
    1.7 MB · Views: 60
  • KIMG0115.JPG
    KIMG0115.JPG
    1.7 MB · Views: 58
Got a compression check and started it. As you can see in the video it needs tuned or maybe a carb kit. I'll get a piston pic up soon.


 

Attachments

  • KIMG0122.JPG
    KIMG0122.JPG
    955.1 KB · Views: 46
  • KIMG0123.JPG
    KIMG0123.JPG
    1.6 MB · Views: 43
That carburetor has been bugging me so I ordered a kit this morning. Friday morning I'll be putting the sale of this saw on hold while I rebuild the carb and since I'm doing that I might as well do a gasket delete, vacuum check and muffler mod. If everything checks out I'll put it back up but I'll have to raise the price.
 
Back
Top