Sold Husqvarna 359

[Ronie]

Husqvarna 359 that needs gone through. The plastics have started to darken a little but it doesn't look to bad. There could be some things that needs fixed, haven't taken the time to check everything out. It has an aftermarket coil on it, missing the wire that goes to the switch and the switch is missing the little metal contact. but everything else looks oem. I'll get some pics of the piston when it cools down and also get a compression check. It took 7 or 8 pulls to get started so at the least it needs the carb adjusted. $225 plus shipping, power head only.

 

[Ronie]

More pics and a video running.

 

[Ronie]

Did a compression check and it was only 120psi. The piston looks good so maybe the ring is sticking or it needs a new one. I'm going to drop the price $25 because of the compression. [

 

[Ronie]

Put the price back to $225. I just went out and checked the compression and it was almost 145psi, I must have had a leak at the spark plug hole when I checked it the first time.