Husqvarna Specs PDF sheet

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mbrick

ArboristSite Guru
AS Supporting Member.
Joined
May 13, 2014
Messages
709
Reaction score
674
I decided to make a printable PDF list of the Husqvarna saw spec sheet, since I reference it so often.
Some of the data is from Bill's, some from members here (thanks SawTroll, Derf, and others) and some I compiled.

PDF attached. Let me know of any suggestions or mistakes, it is a work in progress.

I plan on making one for Stihl as well, I'm just not as familiar with them (go Orange!) ;)

The idea kind of started here while Bill's was down, and draft was worked on here.

Changelog:
Rev H: Removed incorrect max rpm on 234 and 238.
 

Attachments

  • Husqvarna specs Rev H.pdf
    79 KB · Views: 766
Looks great!! Seriously huge effort and a great reference sheet. No need for posting a rev i yet, but when you do,
1) the 74cc 372xp is referenced always as a 372xpw (a little confusing since ordering a current 372xpw XT only gets you a wrap handle and bigger dogs, not larger displacement.)
2) I'd like to see the T540xp appear right above the 543, the 135 appear above the 136, and the 236 appear after the 235. Not sure why they are all at the bottom except the T throwing off the numbering and the other two have incomplete data.


Sent from my iPhone using Tapatalk
 
Also, the 353 and 346 should have the same stroke (32.5mm). SawTroll mentioned that the 353 info was a misprint, and they have the same part number for the crank in the IPL.
 
Thanks for the Information, I was actually working on building such a table, with the years that the models were manufactured too.

Anyhow Thanks this saved me a lot of work.
 
Thanks Karla. I wanted to add release years but could not find enough info. I could if you have the data.

This bump reminded me to post another update. Attaching here -- not able to modify the first post any more.

Rev. I:
-435 specs corrected
-order adjusted for a few saws to sort better numerically
- 353 and 346 should have the same stroke (32.5mm). SawTroll mentioned that the 353 info was a misprint, and they have the same part number for the crank in the IPL.
 

Attachments

  • Husqvarna specs Rev I.pdf
    79.5 KB · Views: 76
Great chart!

Here are some updates for the 5x series.

According to the workshop manual, the 50/50special power heads weigh 5.2 kg/11.5 lbs, the 51/55 weigh 5.2kg/11.2lbs. The weight of the 50/50s with B/C of 13.7 is with the husky 15" b/c. The original sales brochure for the 50 special shows 5.3kg/11.6lbs. I rebuilt my 50 special and pressure washed it so the gas/oil tanks and exterior were spotless. before I put any fuel/oil into it I weighed it and got 11.6lbs.

50 special power output: 2.2kw/3.0hp.

50 special initial H/L is 1 for both according to the husky operator's manual and the workshop manual, walbro says 1 1/4 for both.
 
Husky 35, 34cc, 36.5mm bore, 32.5mm stroke, 1.8hp @ 7800 RPM, 4.2kg with 12" bar and chain, same saw as a Frontier.

L65, 48x36mm, 65cc, 3.8 hp, 8.2kg with bar and chain, 7000 RPM (in cut?)
L77, 52x36mm, 77cc, , 7.2kg with bar and chain, 8000 RPM (in cut?) some of these specs seem backwards and wrong, I will try and check them against my own saws
480, same engine specs as L77.. I got most of mine from Mike Acres site
 
There’s a earlier huskys
The 240s that’s a 40mm bore.
The 240se/Sg 40mm bore
The early 340se/Sg 40mm bore
The 285cd
The 180
The 280
The 380
The 480cd
The 2100cd and 2100xp
 
Someone needs to add the new 550xp mk2, and 572xp


Sent from my iPhone using Tapatalk
 
Back
Top