I'm rebuilding three 200ts at the same time

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stihldragon

ArboristSite Operative
Joined
Dec 18, 2017
Messages
177
Reaction score
73
Location
US
Yesterday I found two 200t,s in bad shape for $150. I already had 1 someone gave me for fixing a saw. I tore down the worst one and there's a little corrosion on the crankcase halves that concerns me.
 
As a matter of fact I did take a pic
d3c89749a90e8f3a66662aaccb097371.jpg
 
Not of the corrosion though, sorry. It's the part of the crankcase halves that is inside the the top end.
 
This website is new to me and very helpful with what Im doing. Any advice is appreciated.
 
This website is new to me and very helpful with what Im doing. Any advice is appreciated.
My best out of 3 build turned out really good. I used engine parts from all three saws. Tested it for a week and sold it

Sent from my Z557BL using Tapatalk
 
Back
Top