Jonsered 2077 build

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Is that the original cylinder?

Sent from my Moto Z3 Play using Tapatalk
 
I was afraid that was your answer. I've been looking for a cylinder for a 2083 I aquired.

Sent from my Moto Z3 Play using Tapatalk
 
It's pretty deep, and vertical. It looks like the ring broke, and broke through the upper part of the piston.

Sent from my Moto Z3 Play using Tapatalk
 
I will this weekend, won't get a chance until then.

Sent from my Moto Z3 Play using Tapatalk
 
OP check your green coil to see if it is the rev limited ones to around 11.5K. Cant stand those and pull them.

I sell all the 52's off NOS and used to help others. I just keep the 48 50 quads and 54's around. I just put my last 54mm on a build because of this crap. Couple 54's with pistons.

Even have nos 1 ring and 2 ring pistons. Last build I used the 2 ring.

p54aaaaaa.jpgp54aaa.jpg
p5054155.jpg
 
My apologies, it's a 52mm piston.
0100734883d29e1a964914a7f1b0d300.jpg


Sent from my Moto Z3 Play using Tapatalk
 
I'm more than likely going to. Won't have much $$ in it so why not.

Sent from my Moto Z3 Play using Tapatalk
 
I’m not knocking him at all. Half the fun is seeing the final result. Glad someone else is willing to post up some port work.

The finish work hardly takes any time. Split mandrel and some sand paper.
949032A6-7CF6-4961-8434-A8323492FD3D.jpeg23C9E417-D35B-4F16-8498-8087C9BA1C63.jpeg19BD37E7-0AFF-43EF-A44B-79648E3F2B23.jpeg
 
Back
Top