ArboristSite.com Sponsors
 
 


Want to Sell Jonsered 670 - Fully Rebuilt

Discussion in 'Archived Tradin' Post' started by huskydude, Sep 9, 2014.

  1. huskydude

    huskydude ArboristSite Guru

    Joined:
    Nov 11, 2010
    Messages:
    765
    Likes Received:
    102
    Location:
    NH
    When I got this there was a hole in the air cleaner and it ingested a lot of dirt, so I tore it apart and did a complete, proper rebuild. New bearings, seals, piston, fuel line, filter, carb kit, etc. It also has an NOS air filter. I converted the saw to an internal impulse setup but kept all of the 670 fast idle/choke functionality, so it works perfect.

    I have about 5-10 tanks on this and it runs fantastic. I have a 2171 so I really don't need it. I also don't need to sell it. I rebuilt it because I enjoy the process.

    The price is 300 plus shipping PHO.


    WP_001026.jpg WP_001024.jpg WP_001025.jpg WP_001027.jpg WP_001028.jpg WP_001029.jpg
     
    DSS likes this.
  2. SS Sniper

    SS Sniper Addicted to ArboristSite

    Joined:
    Jun 27, 2013
    Messages:
    1,046
    Likes Received:
    750
    Location:
    Massachusetts
    Pretty sexy
     
    jughead500 likes this.
  3. cory@owen

    [email protected] ArboristSite Operative

    Joined:
    Jan 3, 2013
    Messages:
    338
    Likes Received:
    428
    Location:
    Georgia
    Somebody is gonna snatch this up. Nice saw.
     
  4. huskydude

    huskydude ArboristSite Guru

    Joined:
    Nov 11, 2010
    Messages:
    765
    Likes Received:
    102
    Location:
    NH
    Thanks guys! She is pretty.
     
  5. nmurph

    nmurph ArboristSite.com Sponsor

    Joined:
    Nov 26, 2007
    Messages:
    16,162
    Likes Received:
    7,113
    Location:
    Somewhere in the space-time continuum
    Nice.
     
  6. MS460WOODCHUCK

    MS460WOODCHUCK Addicted to ArboristSite

    Joined:
    Jun 30, 2008
    Messages:
    4,890
    Likes Received:
    1,298
    Location:
    Ohio
    Very nice saw. Most that are interested will want to know what brand of piston and such you used though.
     
  7. huskydude

    huskydude ArboristSite Guru

    Joined:
    Nov 11, 2010
    Messages:
    765
    Likes Received:
    102
    Location:
    NH
    Meteor of course. Factory clips.
     
    MS460WOODCHUCK likes this.
  8. nmurph

    nmurph ArboristSite.com Sponsor

    Joined:
    Nov 26, 2007
    Messages:
    16,162
    Likes Received:
    7,113
    Location:
    Somewhere in the space-time continuum
    Did you verify that the OEM clips are a close match to the Meteor in terms of diameter? Meteor clips are fine if-

    1. they are C-shaped
    2. they are double-eared and you cut off most of the ear
    Personally, I would prefer Meteor clips be used with Meteor pistons and vice versa.

    Not busting you, those are just my thoughts after using several hundred Meteor pistons. Your saw is a beaut!!
     
  9. huskydude

    huskydude ArboristSite Guru

    Joined:
    Nov 11, 2010
    Messages:
    765
    Likes Received:
    102
    Location:
    NH
    I have a micrometer from my days of rebuilding T5 transmissions that I use to check the clips.
    This site has made me paranoid about clip failure, so I always try my best to prevent it.

    I haven't done as many saws as you Murph, but I have done probably a dozen with the meteor/factory clip setup.

    Appreciate your input though. I think one of the big reasons for using the factory clips was a post from you on a 346 or something where the double eared clip broke.
     
  10. nmurph

    nmurph ArboristSite.com Sponsor

    Joined:
    Nov 26, 2007
    Messages:
    16,162
    Likes Received:
    7,113
    Location:
    Somewhere in the space-time continuum
    Meteor no longer uses the double-eared clips. If you get a kit with them, it is NOS.
     
  11. jwilly

    jwilly ArboristSite Operative

    Joined:
    Nov 7, 2009
    Messages:
    249
    Likes Received:
    286
    Location:
    adirondacks
    Still for sale?
     
  12. huskydude

    huskydude ArboristSite Guru

    Joined:
    Nov 11, 2010
    Messages:
    765
    Likes Received:
    102
    Location:
    NH
    Yes, I still have it.
     
  13. Jon1212

    Jon1212 Riff Raff Fart Knocker from other Forum's.

    Joined:
    Feb 17, 2011
    Messages:
    11,198
    Likes Received:
    14,490
    Location:
    Spanish Fork, Utah
    Ugh! Willpower......fading.......must resist.......buying.......this......saw............
     
    Eccentric likes this.
  14. ScreamingBeaver

    ScreamingBeaver I have cad disease!

    Joined:
    Jan 21, 2014
    Messages:
    104
    Likes Received:
    25
    Location:
    Ontario
    If its still for sale do you ship to Canada?
     
  15. ScreamingBeaver

    ScreamingBeaver I have cad disease!

    Joined:
    Jan 21, 2014
    Messages:
    104
    Likes Received:
    25
    Location:
    Ontario

Share This Page