• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Jonsered 90

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GPRJon

ArboristSite Lurker
Joined
Jan 24, 2020
Messages
6
Reaction score
1
Location
Atlanta
Hello, I’ve been following the site for a while but just became a member recently. I have a few vintage saws that I will be selling starting with this Jonsered 90. The saw starts and runs and is mostly complete. I know I’m missing the spark plug boot and perhaps something else minor like that. Included is a 20” b/c with what I believe to be the original bar by Windsor (sprocket nose). The saw runs great and OMG, she’s a beast! I have a few pics I will post now. I haven’t tried to clean up the the saw. She is very dirty and will clean up significantly. If you need more pics just let me know. Questions welcome!

price $600
 

Attachments

  • FFBBDA53-60D2-4BAF-9BC7-89055FCAACCB.jpeg
    FFBBDA53-60D2-4BAF-9BC7-89055FCAACCB.jpeg
    1.8 MB · Views: 75
  • 07A148E7-ED1C-49CE-95F0-DC157E3BAD78.jpeg
    07A148E7-ED1C-49CE-95F0-DC157E3BAD78.jpeg
    2.7 MB · Views: 72
  • 2301E261-2A2F-4C70-8F80-BF18D7CFE8BD.jpeg
    2301E261-2A2F-4C70-8F80-BF18D7CFE8BD.jpeg
    2.4 MB · Views: 72
  • 841A06A6-D7A9-4578-B276-B4D75E2570F7.jpeg
    841A06A6-D7A9-4578-B276-B4D75E2570F7.jpeg
    636.5 KB · Views: 67
  • 3B5460F7-8D77-48A2-B487-CA4AF011A54E.jpeg
    3B5460F7-8D77-48A2-B487-CA4AF011A54E.jpeg
    757.5 KB · Views: 65
  • E0FBE70D-07F4-49F9-B255-D88FC4BB1EB5.jpeg
    E0FBE70D-07F4-49F9-B255-D88FC4BB1EB5.jpeg
    3.9 MB · Views: 63
  • 11CBAF45-E274-47C8-BD7E-6454E2E1C7F1.jpeg
    11CBAF45-E274-47C8-BD7E-6454E2E1C7F1.jpeg
    4.2 MB · Views: 58
  • E629B19B-2A7E-4974-A572-E51884304630.jpeg
    E629B19B-2A7E-4974-A572-E51884304630.jpeg
    2.5 MB · Views: 59
  • ED087891-3019-40B0-B534-8702EA95D656.jpeg
    ED087891-3019-40B0-B534-8702EA95D656.jpeg
    674.5 KB · Views: 61
Can you put a Jonsereds 90 side cover on a 621 and what can I provide, like a serial number or photo of motor, that will clear the identity discrepancy?
 
Definitely a mutt between 80 and 90.
90 recoil, 80 top cover. Would have a decomp if it's a 54mm cylinder, see if it has the decomp port or not.
Cylinder base number for 80/81/801 is 52zn9, 90 is 54zn71...
 
Here is a pic with the top cover off. BTW, here are my other saws that are for sale. I’d like to sell the whole lot at once. Taking offers. Please PM me. Thanks!6239C13F-EE43-4A32-8C97-440C5ADC7D1D.jpeg
 

Attachments

  • 5946A8CB-D2A0-46CC-BC23-7497CE082520.jpeg
    5946A8CB-D2A0-46CC-BC23-7497CE082520.jpeg
    171.5 KB · Views: 36
  • 43889154-B31D-459A-ADAC-5E1010412685.jpeg
    43889154-B31D-459A-ADAC-5E1010412685.jpeg
    178.8 KB · Views: 34
  • 547AB0AA-B0C4-44BC-AE60-0C53DCCAC150.jpeg
    547AB0AA-B0C4-44BC-AE60-0C53DCCAC150.jpeg
    174.8 KB · Views: 35
  • 2D739CD7-7D22-4666-A615-0FBC6B764BC3.jpeg
    2D739CD7-7D22-4666-A615-0FBC6B764BC3.jpeg
    181.1 KB · Views: 35
  • B3FE09AD-4491-4E89-A608-EBBBFEA8D3F0.jpeg
    B3FE09AD-4491-4E89-A608-EBBBFEA8D3F0.jpeg
    139.2 KB · Views: 35
  • 052B79F1-3BC8-49F0-A01E-037EC596399B.jpeg
    052B79F1-3BC8-49F0-A01E-037EC596399B.jpeg
    158.4 KB · Views: 38
  • 471425C8-4B57-4EBE-93B2-A528E6E5864F.jpeg
    471425C8-4B57-4EBE-93B2-A528E6E5864F.jpeg
    165.5 KB · Views: 35
  • F0B4FBCA-798B-436F-BB53-0E7AE65FB90C.jpeg
    F0B4FBCA-798B-436F-BB53-0E7AE65FB90C.jpeg
    168.3 KB · Views: 37
The problem with positive ID is that much of the 80/90 stuff is interchangeable.
You can effectively turn one into the other and vise versa.
This one has components from both but looks to be more 80 than 90.
Cylinder (and entire top end) looks to be 80/81/801.

Your asking price is on the high side and would be more in line for one with very good cosmetics, mechanical soundness and being mostly consistent with one particular model.
Good advertising practice here (when trying for top dollar anyway) would be to also include pics of the bottom as well as a clear shot of the piston through the exhaust port with the muffler removed.
A compression reading helps too.
A short vid of it running/cutting is always a plus.
And a good track record of prior sales and forum participation unfortunately...
 
Thank you all for the help with identification. I think what we do have here is a combination of an 80 and 90 Jonsereds. I have learned so much in just a couple days from the members and the site in general. Everyone has been willing, helpful, and polite which is great. I will leave this thread open so that others may learn from it as I did. I do have a few more questions about the Jonsereds saw before I repost it. I read something about “west coast” exhaust. Does my saw have this and does that change it’s value? What else should I look for that may affect value? I have a lot of 4 saws that I’m going to list. As ”wcorey”stated, I will be taking video and better pics. Thanks again!
 
Thank you all for the help with identification. I think what we do have here is a combination of an 80 and 90 Jonsereds. I have learned so much in just a couple days from the members and the site in general. Everyone has been willing, helpful, and polite which is great. I will leave this thread open so that others may learn from it as I did. I do have a few more questions about the Jonsereds saw before I repost it. I read something about “west coast” exhaust. Does my saw have this and does that change it’s value? What else should I look for that may affect value? I have a lot of 4 saws that I’m going to list. As ”wcorey”stated, I will be taking video and better pics. Thanks again!
Measure the piston on it to make it definite conclusion but you dont have a jonsereds 90 since it doesn’t have a decompression on the cylinder.
 
Hello, I’ve been following the site for a while but just became a member recently. I have a few vintage saws that I will be selling starting with this Jonsered 90. The saw starts and runs and is mostly complete. I know I’m missing the spark plug boot and perhaps something else minor like that. Included is a 20” b/c with what I believe to be the original bar by Windsor (sprocket nose). The saw runs great and OMG, she’s a beast! I have a few pics I will post now. I haven’t tried to clean up the the saw. She is very dirty and will clean up significantly. If you need more pics just let me know. Questions welcome!

price $600
Still selling? I’m Interested PM me a number
 

Latest posts

Back
Top