Jonsered Chainsaws

[Real1shepherd]

544 97 51-01


Kevin

 

[bulletpruf]

Looking for a wrist pin bearing and two spacers for a 110/111/111S. Anyone got some spares or know where I can find one? I checked my 80 to see if it was the same and it's too small. The 111 wrist pin is 14mm.

Ended up buying a complete 111S that I’ll use for parts. The wrist pin bearing wasn’t difficult but the thrust washers would need to be machined. Wasn’t able to find anything that met the specs so I bought some with the correct ID that needed to be machined down to size.

 

[ErnieG]

544 97 51-01


Kevin

Thanks very much!
Ernie

 

[Clyde85]

I run echo red armor @ 40:1. I always have run 40:1 even with Castrol super 2 stroke.

 

[Yukon Stihl]

Ended up buying a complete 111S that I’ll use for parts. The wrist pin bearing wasn’t difficult but the thrust washers would need to be machined. Wasn’t able to find anything that met the specs so I bought some with the correct ID that needed to be machined down to size.

Would you be interested in selling the tanks?

 

[bulletpruf]

Would you be interested in selling the tanks?

I’ll be parting it out so the tanks will be for sale.

 

[ErnieG]

I found a couple cylinders today and I was wondering if anyone knows what they are for ?
The are both 52mm and I'm thinking a Jonsered because they came from an old dealer .
#1 on the left and #2 on the right

 

[Woodslasher]

#1 is 281 I think, #2 IDK.

 

[taplinhill]

I found a couple cylinders today and I was wondering if anyone knows what they are for ?
The are both 52mm and I'm thinking a Jonsered because they came from an old dealer .
#1 on the left and #2 on the right

What are the casting numbers? Are the both Mahle?

 

[ErnieG]

What are the casting numbers? Are the both Mahle?

 

[taplinhill]

I agree that #1 is a Husqvarna 281/181.
#2 is a Jonsered 2077 / 2083II (same as Partner 7700 and Poulan Pro 475)
And why the 2083II is 77cc still irritates me.

 

[ErnieG]

I agree that #1 is a Husqvarna 281/181.
#2 is a Jonsered 2077 / 2083II (same as Partner 7700 and Poulan Pro 475)
And why the 2083II is 77cc still irritates me.

Thanks very much!
I also found some AV's I'm not sure what they are for .
Any ideas ??
Ernie

 

[Clyde85]

I don't want to jinx it but I may have a cs2172 coming my way soon. I am feeling like a kid at Christmas.

 

[Clyde85]

The saw belonged to a elderly cousin of mine who I grew up next door to. He ended up in a nursing home with dementia. My wife's cousin bought it and finds it to heavy for what he is using it for. He wants to trade it for a Husqvarna 350 and a ms 250 sthil I have.

 

[Clyde85]

Sounds like a done easy deal to make. I told Him I would even give back the 100 dollars he already gave me when he wanted to buy the 350 off of me for 200 dollars.

 

[Clyde85]

I was going to sell the other two any way.

 

[fossil]

I hope it all goes well for you. Nice when a saw deal you really want comes together.

 

[Clyde85]

I agree. Except the 133 Dolmar deal I made as couple months ago. I just rebuilt the saw.

 

[ErnieG]

I'm putting an carb kit in my 2188 and I've run into a problem.
The two Welsh plugs that came with the kit aren't the correct size ..ones to small and one to big .
My carb is a WJ-116 and the kit I ordered was a K10-WJ kit ..all the parts in the kit are correct but it's missing the Welsh plug I need .
Anyone know if this is the correct kit for this carb ?
Thanks very much!
Ernie

 

[fossil]

I'm putting an carb kit in my 2188 and I've run into a problem.
The two Welsh plugs that came with the kit aren't the correct size ..ones to small and one to big .
My carb is a WJ-116 and the kit I ordered was a K10-WJ kit ..all the parts in the kit are correct but it's missing the Welsh plug I need .
Anyone know if this is the correct kit for this carb ?
Thanks very much!
Ernie

Hi Ernie,

The kit is K15-WJ according to the list I have.

I believe it was used on these saws as well.

Stihl MS650 MS660 064 066 Magnum