ArboristSite.com Sponsors


Jonsered identification

Spikey

Spikey

New Member
Joined
Feb 23, 2020
Messages
3
Age
28
Location
New brunswick, canada
Bought a cheap auction saw. Pulled the filter cover and had no plug wire (ant maybe coil, didnt pull side cover yet)

All the stickers are gone mostly and the tag is missing. How do i tell model? Maybe a 630 or 670? I read something about 1 and 2 coils which i will look into (or spots were 1 or 2 used to be)

Will add pics, has a metal off switch and not a plastic slide switch if that helps
 

Attachments

Cornykid

Cornykid

ArboristSite Lurker
Joined
Oct 7, 2018
Messages
9
Age
44
Location
Northern Wisconsin
The 630 had the plastic intake, 625 & 670 had the boots. Looking at the top cover screw locations it's s two piece coil case


Sent from my SM-G973U using Tapatalk
 
  • Like
Reactions: svk
wcorey

wcorey

ArboristSite Guru
Joined
Jan 27, 2012
Messages
918
Location
ma usa
2 piece ignition yes, 630 no.
I'd go 625 on this one, that's the rubber boot intake. Also looks to be a 625 cylinder with the fins near the bottom and higher plug angle...
 
Cornykid

Cornykid

ArboristSite Lurker
Joined
Oct 7, 2018
Messages
9
Age
44
Location
Northern Wisconsin
I would have to agree that it's a 625. I don't see the bubbles on the bottom of the cylinder for the transfers. Sorry I thought I saw the plastic intake. To bad, the 630 is a fun saw.

Sent from my SM-G973U using Tapatalk
 
Top