Log splitter new CV leaks

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joseph Hillenmeyer

New Member
Joined
Jan 2, 2019
Messages
4
Reaction score
1
Location
WISCONSIN
Replaced the control valve in my mtd splitter. The original stopped working. The new one seems correct and the splitter actually performs much better... Except it now spits fluid out of this notch on the detent cover. The old one did not have this knotch. I assume it's some type of pressure relief but it's making a mess!! Something must be wrong. I posted two screenshots from a video. The tank is filled (not over filled). It spits right before the detent releases the arm to the nuetral position. And then again on the way fwd to the next log.
 

Attachments

  • Screenshot_20201227-170227.png
    Screenshot_20201227-170227.png
    2.3 MB · Views: 13
  • Screenshot_20201227-170103.png
    Screenshot_20201227-170103.png
    2.3 MB · Views: 11
Thank you. Is the o ring located within the detent cover?

This was listed as a "nortrac" brand but someone else must make it because I can't find anything online except the link to the buy it the at northern tool site. No spec sheets or parts lists.
 
Back
Top