McCulloch Chain Saws

Wesspur
shop deals on amazon
Advertise with us
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Jethro 2t sniffer said:
Well be glad its not an A.

Now I remember reading somewhere the sp80 had a different piston. Does anyone know if the new 81 850 and on piston works? I presume it does but presumption is the root of all F ups lol
Click to expand...
You are correct on the sp80 piston being different. Its a part # 87791.....however it is or has also been superseded with the B piston which is 92519. This information is from my dealings with bob johnson over the years and his bible mac books. I do not question it.
 
North East Tennessee Saturday MAC Report

No report last Saturday. Both Brian and I were under the weather and thus no MAC action. I got a new computer today so I can now read the bottom half of each page. Cute little thing about the size of a disk drive. Hopefully I can transfer my pictures and MAC documents over to it.

We had our first snow this week so I expect wood will start moving a little quicker off the lot and Brian and I can get back to cutting.

Be safe.

Ron

This valuable report is provided through the the generous support of MacNuts like you and Blind Squirrel Falling, one of America's greatest imaginary businesses.
 
Tidied up ok. 20201203_211516.jpg20201203_211654.jpg
20201203_211823.jpg
This spike I made for a 7-10 it sits on the ground just nicely but also vinny showed how good it went on his 81 so its going to live here now.

I have the pattern and a jig made for it now so if anyone is after one I could work something out. Its about 12 US bucks to ship from the bottom of the world.

All it needs now is a full wrap and a new chain. Not sure about the DIY boot pad yet but its still there at this stage
 
Jethro 2t sniffer said:
Tidied up ok. View attachment 871714View attachment 871715
View attachment 871716
This spike I made for a 7-10 it sits on the ground just nicely but also vinny showed how good it went on his 81 so its going to live here now.

I have the pattern and a jig made for it now so if anyone is after one I could work something out. Its about 12 US bucks to ship from the bottom of the world.

All it needs now is a full wrap and a new chain. Not sure about the DIY boot pad yet but its still there at this stage
Click to expand...
Cool spike Jethro.
 
Jethro 2t sniffer said:
Tidied up ok. View attachment 871714View attachment 871715
View attachment 871716
This spike I made for a 7-10 it sits on the ground just nicely but also vinny showed how good it went on his 81 so its going to live here now.

I have the pattern and a jig made for it now so if anyone is after one I could work something out. Its about 12 US bucks to ship from the bottom of the world.

All it needs now is a full wrap and a new chain. Not sure about the DIY boot pad yet but its still there at this stage
Click to expand...
I think the boot pad/ hand protector looks good with the custom spike , definitely says "I'm a work saw!".
 
McCulloch 690, the 600 Series version of the cut off saw.

I have a couple versions of the 795, the 690, and a 390 based on the 300 Series saws. I still need a 10 Series and the Mini Mac versions to round things out.

IMAG2281 (640x361).jpg

IMAG2282 (640x361).jpg

IMAG2283 (640x361).jpg

IMAG2286 (640x361).jpg

IMAG2287 (640x361).jpg

DSCN5766.JPG

20191128_183435.jpg

For what it's worth, Bob Johnson has (had anyway) a large supply of those oversize wrap handles for the 690 saws.

Mark
 

Similar threads

C
Want to Buy McCulloch Super 250
Replies
6
Views
607
Bill G
B
Chainsaw Collectors
McCulloch 610 chain brake guard install, help?
2
Replies
20
Views
824
singinwoodwackr
singinwoodwackr
B
New from Bavaria
Replies
4
Views
225
Bigsaw_George
B
J
A few very nice old saws
Replies
0
Views
161
jackdaripper
J
L
McCulloch Mini Mac 35
Replies
1
Views
192
gumneck
gumneck

Latest posts

Back
Top