• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

McCulloch NOS OEM Parts, Variety, LOOK

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brushwacker

Addicted to ArboristSite
AS Supporting Member.
Joined
Jun 25, 2006
Messages
4,102
Reaction score
1,852
Location
Medaryville, IN USA
Top end assy :I don't know for sure, the piston P# is 69212, May be a 3-10 or 2-10 a friend told me. Dusty and tarnished a bit from age, needs a normal cleaning.$35
carb #1 P# 214082B: Not sure what it fits is made in Japan, Zama, M7 388on top,M1 on bottom
MAC110 MAC130 AND ALL 600016 AND 600017 SERIES. Eager Beaver,16,100+ 160 series check your model $20
rim sprocket clutch hub assy P# 95166 : Fits the Pro Mac 610,650, 700,10-10 and I believe several others $20
Clutch Hub: Fits the Pro Mac 610,650, 700,10-10 and several other bigger models $35.
Flywheel Ignition kit: 219331 fits Eager Beaver 2.1,Power Mac 310-320-300 chainsaws and 390 Cuts All Saw $25
Carb #2 P# 214763
Only fits saws that were originally equipped with the Zama C2 type carburetor P/N 214763.
fits: McCulloch Pro Mac 800,
McCulloch Pro Mac 805,
McCulloch Pro Mac 8200,
McCulloch Double Eagle 80 $35

Sprocket #2 P# 65370 Not pictured .354 Pitch 7 Teeth 1/2" Diameter Crankshaft . I think it is close to the fit of the rim assy 95166. It is the old famed .354 pitch chain that fits it. $8
Buyer pays shipping. Sorry I don't ship international , I am aiming to put this stuff on ebay for higher prices if it doesn't sell soon. Probably have again this much more Mac stuff I intend to get to later. I think there is 3 flywheels and this and that.
 
Long shot I know, but is there ANY chance you still have the Zama Carb? (214763)
Top end assy :I don't know for sure, the piston P# is 69212, May be a 3-10 or 2-10 a friend told me. Dusty and tarnished a bit from age, needs a normal cleaning.$35
carb #1 P# 214082B: Not sure what it fits is made in Japan, Zama, M7 388on top,M1 on bottom
MAC110 MAC130 AND ALL 600016 AND 600017 SERIES. Eager Beaver,16,100+ 160 series check your model $20
rim sprocket clutch hub assy P# 95166 : Fits the Pro Mac 610,650, 700,10-10 and I believe several others $20
Clutch Hub: Fits the Pro Mac 610,650, 700,10-10 and several other bigger models $35.
Flywheel Ignition kit: 219331 fits Eager Beaver 2.1,Power Mac 310-320-300 chainsaws and 390 Cuts All Saw $25
Carb #2 P# 214763
Only fits saws that were originally equipped with the Zama C2 type carburetor P/N 214763.
fits: McCulloch Pro Mac 800,
McCulloch Pro Mac 805,
McCulloch Pro Mac 8200,
McCulloch Double Eagle 80 $35

Sprocket #2 P# 65370 Not pictured .354 Pitch 7 Teeth 1/2" Diameter Crankshaft . I think it is close to the fit of the rim assy 95166. It is the old famed .354 pitch chain that fits it. $8
Buyer pays shipping. Sorry I don't ship international , I am aiming to put this stuff on ebay for higher prices if it doesn't sell soon. Probably have again this much more Mac stuff I intend to get to later. I think there is 3 flywheels and this and that.
 
I probably have some of that stuff stashed here and there but i think i sold the carbs on ebay. Will look through my left overs when i get a chance.
Thanks Bushwhacker, I am looking for a Carb. for My DE-80 either the Walbro SDC 85-1 McCulloch Part # 218616, or the Zama Carb. Part # 214763, Thanks for your Time.
 
Back
Top