davidtown
ArboristSite Operative
I recently purchased a 125 project from another member here. As expected it came in a box and was missing some parts. Even with things missing I am pretty excited about the saw.
My goal is to bring the saw back to life. Nothing crazy...used parts will be fine for me.
Looking for:
Any and all Nuts/bolts/screws
Starter Cover (I have the starter and dust shield)
Clutch Drum
Cylinder Jacket (heat shield thing)
Air Filter
Bar Plates
Lower Mount Bracket (PN: 85220)
Starter Handle (If available otherwise I can figure something out)
Spark Plug Cover
Fuel line and filter
Oil Pickup Line
Crank Bearing and seals
Carb Anchor
Carb Boot (understand there is a Stihl part fix but it isn't exact...I believe it is off an 084 or something)
Crankcase Gaskets
So besides all that I think I'm good to go!!!
I have a detailed list with part numbers if anyone cares. Willing to pay going rate for parts and I consider myself easy to deal with even if my wife says otherwise.
Be well,
Dave
My goal is to bring the saw back to life. Nothing crazy...used parts will be fine for me.
Looking for:
Any and all Nuts/bolts/screws
Starter Cover (I have the starter and dust shield)
Clutch Drum
Cylinder Jacket (heat shield thing)
Air Filter
Bar Plates
Lower Mount Bracket (PN: 85220)
Starter Handle (If available otherwise I can figure something out)
Spark Plug Cover
Fuel line and filter
Oil Pickup Line
Crank Bearing and seals
Carb Anchor
Carb Boot (understand there is a Stihl part fix but it isn't exact...I believe it is off an 084 or something)
Crankcase Gaskets
So besides all that I think I'm good to go!!!
I have a detailed list with part numbers if anyone cares. Willing to pay going rate for parts and I consider myself easy to deal with even if my wife says otherwise.
Be well,
Dave