Want to Sell MMWS 372

[Jimmy in NC]

2006 365 Special that is wearing a MMWS ported Meteor top end. Saw was a full rebuild thread 5-6 years ago. Always had E free and synthetic oil. All OEM except the top end and Hyway filter under the high top. Walbro carb. I do not burn wood and live in a sub division... seriously doubt it's had 5 gallons of mix through it. Can get a compression reading if needed. Asking $700 shipped via Fedex in the US.



Sent from my SM-G955U using Tapatalk

 

[Jimmy in NC]

If you want specific pics just say so.

Sent from my SM-G920V using Tapatalk

 

[Jimmy in NC]

Video of it on second tank of fuel still wearing a low top. Randy himself was running it against a 750 Homelite.



Sent from my SM-G920V using Tapatalk

 

[Armbru84]

Top shelf guy to work with here. Nice saw!

 

[luckydad]

One of the best guys on the site !!
I’ll guarantee he goes above and beyond !!!



Sent from my iPhone using Tapatalk

 

[Jimmy in NC]

Any intetest? Tire kickers? Offers?

Sent from my SM-G920V using Tapatalk

 

[wash-climber]

I have $500 for ya

 

[Jimmy in NC]

I have $500 for ya

For that money Ive got a Huztl 660

Sent from my SM-G920V using Tapatalk

 

[Jimmy in NC]

For that money Ive got a Huztl 660

Sent from my SM-G920V using Tapatalk

Runs pretty good.

Sent from my SM-G920V using Tapatalk

 

[Jimmy in NC]

Bump on the 372?

Sent from my SM-G920V using Tapatalk

 

[hseII]

Video of it on second tank of fuel still wearing a low top. Randy himself was running it against a 750 Homelite.



Sent from my SM-G920V using Tapatalk

I think this is where he pulled his hamster the 1st time.

 

[Chris Batey]

Runs pretty good.

Sent from my SM-G920V using Tapatalk

What’s the story on this lil fella

 

[Jimmy in NC]

What’s the story on this lil fella

China 066 kit. MMWS jug from Cross. Meteor piston, OEM piston pin bearing, Hyway dual port muffler, modified oil pump. Runs damn good for an 066 compared to stock.

Sent from my SM-G920V using Tapatalk

 

[Eric howes]

Runs pretty good.

Sent from my SM-G920V using Tapatalk

What kind of money do you need for this farmertec. Got any videos of this beast running?

 

[Jimmy in NC]

What kind of money do you need for this farmertec. Got any videos of this beast running?

Let me total parts and see where I am in it. I can get some videos tomorrow if you want. I'll shoot you a PM.

Sent from my SM-G920V using Tapatalk

 

[dce1843]

Runs pretty good.

Sent from my SM-G920V using Tapatalk

Holy cow. How did you get so much compression? I'd be interested in seeing a video if you have one. What did you want for it!

 

[Jimmy in NC]

Holy cow. How did you get so much compression? I'd be interested in seeing a video if you have one. What did you want for it!

Im into it right at $500. Id sell it for $500.

Meteor piston, Cross Mastermind Jug, oem pin bearing, oem cir clips, dual port muffler, modified oil pump (36" in dead hardwood no problem) OEM badges, OEM air deflector in the filter cover, OEM bar adjuster....

That compression was with less than a tank through it. It'll spank a stock OEM 066/660. (I work on lots of 066/MS660s).

Chain needed work but this was a bit of dead and dry pecan:



32 or 36 wide nose available with purchase along with a MaxFlow filter setup.

Sent from my SM-G920V using Tapatalk

 

[Armbru84]

Im into it right at $500. Id sell it for $500.

Meteor piston, Cross Mastermind Jug, oem pin bearing, oem cir clips, dual port muffler, modified oil pump (36" in dead hardwood no problem) OEM badges, OEM air deflector in the filter cover, OEM bar adjuster....

That compression was with less than a tank through it. It'll spank a stock OEM 066/660. (I work on lots of 066/MS660s).

Chain needed work but this was a bit of dead and dry pecan:



32 or 36 wide nose available with purchase along with a MaxFlow filter setup.

Sent from my SM-G920V using Tapatalk

Looks good Jimmy. I built one similar and was very impressed with it. Lot stronger than stock.

 

[Jimmy in NC]

OK ....Thanks for all who inquired...the ms660 is sold.

Bump for the MMWS...

Sent from my SM-G920V using Tapatalk

 

[Jimmy in NC]

Bump for a price drop. $700 shipped?

Sent from my SM-G955U using Tapatalk