Ms 311 motor

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Justin Taylor

ArboristSite Guru
Joined
Dec 21, 2018
Messages
811
Reaction score
525
Location
Minnestoa
Ok so im trying to rebuild a ms 311 i have it all torn down but i cant fine a jug for it anywere online i could buy one from sthil but that would cost too much anyone have ideas? Thanks
 

Attachments

  • 1545449324388847756897092844889.jpg
    1545449324388847756897092844889.jpg
    1.1 MB · Views: 17
  • 15454493684293022280649541517203.jpg
    15454493684293022280649541517203.jpg
    893.2 KB · Views: 16
Here are some pics via the exh. Port beings the saw is still assembled everything looks usable if you want just the piston and cyl I can disassemble or I could also sell you the entire saw minus the fuel tank for an even 75 bucks then you would have some spare parts including carb and such . This saw has rough crank bearings on bottom end. You decide what you would like to spend then figure in shipping cost on top of parts asking price .
 

Attachments

  • 3A20DA7D-25D4-4647-9DAF-CBF5A68B4E29.jpeg
    3A20DA7D-25D4-4647-9DAF-CBF5A68B4E29.jpeg
    1.7 MB · Views: 10
  • C21F02CB-21E6-451D-A847-51C84A4ED00A.jpeg
    C21F02CB-21E6-451D-A847-51C84A4ED00A.jpeg
    1.6 MB · Views: 9
  • A71F633A-9BE2-4C66-B7A4-E60E011DA843.jpeg
    A71F633A-9BE2-4C66-B7A4-E60E011DA843.jpeg
    1.6 MB · Views: 8
Back
Top