• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


ms192 carb

huskydude

huskydude

ArboristSite Guru
Joined
Nov 11, 2010
Messages
765
Age
43
Location
NH
Are there any alternative carbs for this that will work? I tried epoxying the accelerator pump but that made it worse.
I can't get it to accelerate now. Is there any other way to modify it to possibly get it to work?

I offered to foolishly fix my friends saw and it has been a nightmare. :cry:
 
huskydude

huskydude

ArboristSite Guru
Joined
Nov 11, 2010
Messages
765
Age
43
Location
NH
I had the low speed cranked out like 4 turns and it didn't make a difference. I could try the metering lever.
I had to stop fiddling with it before I smashed it into a pine tree.
 
Chris-PA

Chris-PA

Where the Wild Things Are
Joined
Jul 9, 2011
Messages
10,060
Location
PA
Why get rid of the accelerator pump? I have several saws with them and they work great - you can set the L properly at max idle rpm without having to make it richer than optimum. Never had one fail.
 
Top