• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell MS390 W/non factory engine housing

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ISUR5

New Member
Joined
Jun 3, 2018
Messages
2
Reaction score
1
Location
Recliner
AC808EA0-0935-4FA7-855B-1A37023AA902.jpeg 5FB57C05-A639-4CB3-9A46-9F7CA15B2754.jpeg A3072677-168E-4615-842B-320B1C077A8B.jpeg 94BD019B-51E2-4210-970F-AC5E69AFB9AF.jpeg 5018036F-689D-4326-A132-88AA1FD7D06C.jpeg 5F1135D6-0F3B-46DF-A17D-6F69E5D4BB70.jpeg


Runs Strong, oils. Gas tank had a hole in it so I bought a new engine housing off of Amazon and threw all the parts on it. Before I swapped it out I emailed stihl and found out it was made in 2006. The air filter is probably Chinese and maybe the ignition coil(looks quite new)? It could be stihl the guy I got it from had it dealer serviced regularly, and I don’t recall buying an aftermarket one. I rebuilt it 18 months ago and it’s been sitting, fired up in 3 pulls. Almost new Stihl Bar and Chain have maybe 20 cuts on them. Have no use for the bar and chain so I can’t do PHO, sorry. $250 plus $25 shipping PayPal F&F.
 
Back
Top