• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade MS661 repair or part out

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Clifwoodman

ArboristSite Lurker
Joined
Feb 13, 2019
Messages
7
Reaction score
6
Location
North Carolina
D37D4110-CB9B-4A18-9757-C0C5260FE13D.jpeg 02A41F0B-7F93-4C2C-AA55-C5F9F70229BA.jpeg 53DF1458-D06D-4428-B32F-466938C11EA1.jpeg D6BFAA3F-C862-4B2B-8532-4F4838360FB2.jpeg 617A47A5-ADD3-48E0-B331-1A8A388AF767.jpeg 90022785-23E4-49C5-B345-05A49F2B9952.jpeg A3C4B4B2-5C6D-46BA-A920-3719C4DC4ACD.jpeg Hey guys, just needing opinions. Barber chair took out my 661 and trying to figure out what to do with it. Crankcase jug and carb look ok except 1 bent fin.
 
Keep it, Hang it on the wall and pick parts from it as needed. I personally would find it entertaining to stare at in my garage. lol
 
Wow. That's a good job on that one. Not much left to start a rebuild with. I would suggest parting it and a guy may b surprised the yield $ from the parts. I assume crank piston and cylinder are good.
 
Get a Chinese parts kit and rebuild it. Use the OEM parts from this poor saw - slug, jug, carb, and whatever other Chinesium parts people say should be swapped out for OEM. Keep the left over Chinesium parts for SHTF spare parts.
 

Latest posts

Back
Top