My Stihl 024 is ready to get right carb settings...

[camel]

My Job is nearly done on my 024. Only Break in and Carb settings.
These are the following Things I have done.
Disasseble & clean everything. New Crank Seals, New Cylinder Feet Gasket, new Piston+Rings Carb rebuild and so on....

Is there anybody who can tell me the right rpm´s for this Model?
I think 13500 or something in that region?
It would be helpful to have a complete List of the Datas too (Bore, Stroke and so on)
I have a pdf for my 036 where everything is listet.

More than one tank iddling for the first break in?
Does the Model 024 ever come with a adjustable Oiler?
Mine has a permanent one...

Thx
Camel

 

[treeclimber165]

Here is all you need for your carb settings.
http://www.madsens1.com/sawtune.htm

 

[camel]

hi Brian,
I know this site....
I don´t see the settings i need!
There is only Data for these Models:

STIHL 044 - 13,500 RPM
STIHL 066 - 13,000 RPM
STIHL 084 - 11,500 RPM

HUSQVARNA 272 - 13,500 RPM
HUSQVARNA 288 - 13,000 RPM
HUSQVARNA 394 - 13,000 RPM
HUSQVARNA 3120 - 11,500 RPM

The 024 is missing !
Is there something you can see, different than me??
later
jens

 

[Jacob J.]

Howdy-

I think the 024 originally was recommended from the factory at a top setting of 12,500. Stihltech would be the guy to ask on this one.

 

[stihltech]

024

Does the crank have caged or loose rollers on the lower rod? Caged, it will go 12500 to 13000 ok. Loose, I would keep it down to 11500.

 

[camel]

loose rollers, it is an older Model....
Ok, I go to round about 11500.
Thx a lot everybody
C.