Michael Teuton
ArboristSite Member
Can anyone tell what model this is ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Mystery Husky
- Thread starter Michael Teuton
- Start date
Help Support Arborist Forum:
CsClimbr
Ex-Climber with CAD
455 Rancher maybe? No side plates or labels?
Michael Teuton
ArboristSite Member
That’s what I was thinking, the decomp valve is throwing me off
Sent from my iPhone using Tapatalk
Michael Teuton
ArboristSite Member
Actually just found a picture of one looks close with decomp valve
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Chainsaw Jim
CJ Saws, LLC
How many cc's does it say on the white sticker above the decomp button?
Michael Teuton
ArboristSite Member
Can’t make it out looking at purchasing off OfferUp and that’s the only pic.
Sent from my iPhone using Tapatalk
Need more pics.
Michael Teuton
ArboristSite Member
Need more pics.
Lol trying the op not very responsive
Sent from my iPhone using Tapatalk
346, 353? I’m thinking the 460 and 455 have a decomp thru the cover.
Michael Teuton
ArboristSite Member
The ad says ran then sat now doesn’t run hoping it’s a 353
Sent from my iPhone using Tapatalk
Rather have a 346, 353 wouldn’t be all bad.
Chainsaw Jim
CJ Saws, LLC
357xp by the look of the fatter brake flag. 359 if there are removable transfer covers on the cylinder.
Michael Teuton
ArboristSite Member
Can only hope it is ,not really interested in a 455
Sent from my iPhone using Tapatalk
cuinrearview
Red saw lover
Metal wrap=not a four series. The fat chain mudflap on the clutch cover says 357 or 359.
Michael Teuton
ArboristSite Member
Hope it is now if only they would respond. Only asking $200 for it
Sent from my iPhone using Tapatalk
decableguy2000
ArboristSite Guru
my vote 346,351,353,357,359
cuinrearview
Red saw lover
For a non-runner I wouldn't pay more than half that. Just sayin'
CsClimbr
Ex-Climber with CAD
My bad, I’ve worked on one of the 455R’s in the past and now I remember the decomp valve on top. The guy brought it to me cause he couldn’t turn it over after his friend replaced the decomp with a 3” bolt and JB-Weld to seal it
I had to explain to him that said bolt was interfering “just a wee bit” with the piston travel. Luckily I was able to shave it down with a dremel through the bottom of the jug and away she ran
Michael Teuton
ArboristSite Member
Oh I’m not gonna pay $200 for but I can probably talk him down. My thoughts are just needs a carb rebuild due to varnish
Sent from my iPhone using Tapatalk
Chainsaw Jim
CJ Saws, LLC
Non running 357/359's go for well over 200 on Ebay.
