ArboristSite.com Sponsors
 
 


Need help with 372 XPG heated handles

Discussion in 'Chainsaw Stickies' started by 288husky, Mar 4, 2014.

  1. 288husky

    288husky ArboristSite Lurker

    Joined:
    Mar 4, 2014
    Messages:
    6
    Likes Received:
    1
    I just picked up a used 372 XPG for $50.00 the cylinder is good the piston was missing...the saw is otherwise complete and cosmetically in very good condition......My question is........it has heated handles. The top hand has a red wire and a black wire coming out of the handle. The red wire is plugged in....the black wire is just hanging....does any one know where this black wire goes? Any help would be of great help.. THANKS!!
     
  2. Big_Wood

    Big_Wood westcoast dweller

    Joined:
    Dec 11, 2012
    Messages:
    7,335
    Likes Received:
    8,697
    Location:
    Canuckistan
    black wire goes to ground
     
  3. Big_Wood

    Big_Wood westcoast dweller

    Joined:
    Dec 11, 2012
    Messages:
    7,335
    Likes Received:
    8,697
    Location:
    Canuckistan
    this should also be posted in the regular chainsaw forum rather then the stickies. i don't really care that you posted it here but the mods might.
     

Share This Page