Older Craftsman chain saw 2.0/14

[Smcgill]

I have this older saw " Craftsman 2.0/14 "and I 'm looking for a chain for it.
I know it is a 14" bar and the pitch is 3/8 ..what is the gauge?
On the bar is 44133 QC over 14 3/8

Second question no ide just fast .what screw should I adjust ..

 

[cscltd]

Chain is probably 63pm3-52e in Stihl’s numbering system
.050 gauge low profile 3/8 pitch 52 drive links
do you mean there is no low speed fuel screw? If so, then it is fixed setting, high speed would be 1 turn out for base setting and fine tune from there

 

[Smcgill]

I found a chain @ Lowes this morning ..I'll have to match it up when I get home ..

 

[rarefish383]

If it's running real fast like it's over riding the trigger, it can be an air leak. That will melt it in short order.

 

[Smcgill]

I think I just have to adjust the carb ,,I did replace the fuel lines and filter .I'll run some Seafoam thru it as well ..

 

[ray benson]

I have this older saw " Craftsman 2.0/14 "and I 'm looking for a chain for it.
I know it is a 14" bar and the pitch is 3/8 ..what is the gauge?
On the bar is 44133 QC over 14 3/8

Second question no ide just fast .what screw should I adjust ..

See if this is your saw owners manual. It has a parts breakdown near the back and a page on the carb adjustment.

 

[Smcgill]

I have all the manuals thanks.
This is the service one.

 

[Okie]

This Oregon gauge will answer all your questions fast about your chain specs if you have the old chain to use the gauge on.
OREGON Chainsaw (Chain Saw) Bar & Chain Pitch, Gauge, File Measuring Tool 556418 5400182955009 | eBay

Fuel lines, etc replacing.
I stumbled onto a mixed package of real good DIFFERENT SIZES tygon tubing sometimes back at a very reasonable price and I can go to the package and select whatever size I need for fuel lines.
You can find such doing a search for tygon tubing. (think maybe mine came from amazon)

 

[Smcgill]

Found the right chain @ Lowes ...funny they sell craftsman now..