One of my last good saws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I can see the reasons for a MM but I would never port any of my saws for the simple reason that I would not see an advantage
 
your not the man that sells those piltz hot rod saw parts on ebay ,I always wondered about those kits
Lol

No sir, I am not. My 026 make around 5hp. Maybe a drop more. They’ll pull and oil a 20 in real life. I wouldn’t recommend a bar over that. These were vids done at buyers requests and to load the hell out of the saws to seat rings after initial assembly and firing.

Here my patented G-F-Y bar. 20” 3/8 Stihl RS chain.


To the OP, sorry for the Hijack.
 
Orderd tank and misc parts for my 44 them noticed my pile of orange saws under the bench. A 281 and 266
81 is smeared across the exhaust 66 i dont know whats wrong. Seems to have a hella alot of compression.

I screwed up and gave away the intake elbo and filter off the 81.

66 might be a 20180226_221155.jpg runner for cheap

My prefrence would ne to turn the 81 into a 88 but would rather put money into the 44.

No worries hijack away.

I to have run long bars on my 26
 

Attachments

  • 20180226_223435.jpg
    20180226_223435.jpg
    3.7 MB · Views: 21
Found quite a few pieces of the 440 puzzle and even a 66 carb. Havent found a coil or chaincase cover. I think thats all im lacking. I guess i can pull plastic cover off the 290 i have20180227_215620.jpg

That cylinder has alittle smear in it will clean up nicely. Its all stock

Looking forward to this project . Also found i have more bars and chains then i thought i had. Ive got two 32s a 25 or 8 a 20 and 18 and a few oregon or husqvarna bars. Not sure i have chains for all them though.

Heres one of the trees from 6 years ago.
 

Attachments

  • 20180227_174743.jpg
    20180227_174743.jpg
    3.6 MB · Views: 19
Found quite a few pieces of the 440 puzzle and even a 66 carb. Havent found a coil or chaincase cover. I think thats all im lacking. I guess i can pull plastic cover off the 290 i haveView attachment 636311

That cylinder has alittle smear in it will clean up nicely. Its all stock

Looking forward to this project . Also found i have more bars and chains then i thought i had. Ive got two 32s a 25 or 8 a 20 and 18 and a few oregon or husqvarna bars. Not sure i have chains for all them though.

Heres one of the trees from 6 years ago.



Good solid dry wood. Spruce?
 
Back
Top