• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade Oregon and Stihl bars to trade

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brandon owenby

Pugsley
Joined
Feb 2, 2018
Messages
395
Reaction score
49
Location
Fairview, NC
I've got around 20-30 12-20" stihl oem homelite OEM, and Oregon bars. I'll have a list up hopefully by tomorrow afternoon. Many of the bars I've painted so that they would not rust and some I've sprayed decals on. I'm looking for a TS 400 crankcase. Muffler for 242 or that will fit. 181 sprocket cover, top cover. 266se starter assembly, top cover, muffler. 242 top cover sprocket cover and cylinder. NOW I APOLOGIZE ABOUT MY WRITING I WILL GET THE REST OF THE BARS ON THERE AND MAKE A MUCH CLEANER COUPLE PAGES BUT THEY'RE GOING QUICK HERE ARE THE PART NUMBERS SOME THE BEST I COULD GETIMG_20180402_092053416.jpg IMG_20180402_092106983.jpg IMG_20180402_092103133.jpg IMG_20180402_092039524.jpg IMG_20180402_092058279.jpg IMG_20180402_092048076.jpgIMG_20180402_092053416.jpg IMG_20180402_092106983.jpg IMG_20180402_092103133.jpg IMG_20180402_092039524.jpg IMG_20180402_092058279.jpg IMG_20180402_092048076.jpg IMG_20180402_092111368.jpg IMG_20180402_092039524.jpg IMG_20180402_092032321.jpg IMG_20180402_092035759.jpg
 
I've got around 20-30 12-20" stihl oem homelite OEM, and Oregon bars. I'll have a list up hopefully by tomorrow afternoon. Many of the bars I've painted so that they would not rust and some I've sprayed decals on. I'm looking for a TS 400 crankcase. Muffler for 242 or that will fit. 181 sprocket cover, top cover. 266se starter assembly, top cover, muffler. 242 top cover sprocket cover and cylinder

Looking for an 18 or 20 in bar for Stihl ms390.
 
Looking for 18" stihl 3003 mount .325 .063, or oregon D025 mount with .325, .063. Just good used for a resale project I'm working on. Cheaper is good , Good used chain would also work. 505821 Thanks
 
Looking for 18" stihl 3003 mount .325 .063, or oregon D025 mount with .325, .063. Just good used for a resale project I'm working on. Cheaper is good , Good used chain would also work. 505821 Thanks
Not too familiar with mount types but I have way too many bars so I'm sure I'll have one could you tell me what it's going on or how in comparison it might be against a 028 wb
 
How about an 18", 0.050" gauge 3/8LP or Picco? Would be a Stihl 3005 mount. Should fit MS251 and down.
 
Ok all I have that will fit a 028 is a 16" .325 30030006813 . Another 16" 30030006813 a 20" oreg .325 203slgd025 and a rollamatic 20" 3/8 30030006117 that's what I have for what the 028 mount fits I need to kinda have a for instance on the other but I have like 30-40 bars most 18 and 20 sorry I didn't have that 18
 
Yeah I have 2-3 different .325 Stihl 028 mount bars a 14, 16, and a 20" as well

Any lightweight bars? 3/8 .050?

3003 is Stihl mount 024-066
D025 is the Oregon code for the 024-066

3005 is Stihl for top handles,polesaws and most all homeowner stuff.
A074 is Oregon code for them.
 
Back
Top