Oregon Speedcut nano release date?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

crotchclimber

ArboristSite Operative
Joined
Nov 21, 2013
Messages
419
Reaction score
249
Location
Frederick , CO
Anyone know when the new Speedcut nano .325 .043 kits will be released? Saw it on the battery T536lixp at TCI Expo last year and really want it for mine. 3/8lopro sucks! Rep said they will have sprockets for common saws in addition to the bars and chain.
 
Not a very popular topic.

I noticed that the link Philbert provided 5 months ago has been deactivated. Post #183 https://www.arboristsite.com/commun...-chain-and-speedcut-guide-bars.285694/page-10 After searching for volunteers to test it (presumably) that thread on here has gone silent.

https://www.oregonproducts.com/en/speedcutnano It shows a phone number and email address if curious enough please post what you find.

The Stihl 44dl loops of 61pmm3 will fit on that T536lixp of yours even if it says use 45dl. I think it is good/impressive.

Fran.
 
We should have some SpeedCut Nano here to test at our GTG next month.

No official release date yet
 
They are 'nano' - you have to look really hard . . .

Philbert
I will assume it is a joke and not look at all. It would be of interest to see what Oregon uses similar part numbers across various brands and models.

I did not see 041 mount bars, that is Makita in the stuff I have. What bar mount does your Oregon battery stuff have? 041 may be the most common in the "tool" company offerings Milwaukee, Dewalt ???

15" has been 64 drive links in Husqvarna 13" was (and still is) 56d. 16" =66dl and 18" 72dl. Of course Stihl is differed and differs 3005 to 3003 mount.
 
I will assume it is a joke and not look at all.
It was.

Oregon 'announced' this chain some time ago, but I have yet to see it available.

I believe that my Oregon battery-powered saws do use the 041 mount, and the pole saw uses a different one. Some battery saws also run 0.043" gauge chains in 1/4" or 3/8" low profile pitch.

Philbert
 
Anybody here run this chain yet at trade shows?

It's extremely smooth and faster over 90 and 91 series chain from Oregon. Did I say it's smooth?[emoji16]
 
5e9c8a421b908f8e5d23b7be28640e36.jpg
b3ba1bb40bca7febec3fdbbfc60f87ca.jpg
6912007dc5fd6a480594a6e9820d0500.jpg
815db1576c7837f13830070b35c178f3.jpg
 
Check out the video. 201T on Stihl chain vs Makita cordless on nano

Starts :50 seconds in

 
Back
Top