Sawsrusinc
ArboristSite Operative
This saw runs very well but the chain wont stop spinning. I think the clutch pads are sticking.. I did not mess with it much as I am dealing with some severe back issues right now. The compression feels good but if you are interested I can pull the muffler. It also needs a bolt for the muffler as one of them is gone. It has sat for some time but it fired right up when I started it. The decompression release if working its just a bear with that clutch the way it is to start it. Dangerous ).. Please PM if interested, Thank you
Attachments
-
00k0k_k7fsAuMgXru_1200x900.jpg112.6 KB · Views: 33
-
00l0l_IKWUlPIjhZ_1200x900.jpg110.3 KB · Views: 34
-
00Y0Y_6YahjKD4qeV_1200x900.jpg104.1 KB · Views: 36
-
00a0a_arbpU8N1gct_1200x900.jpg98.4 KB · Views: 33
-
00Z0Z_vPTdVWKkW_1200x900.jpg102.2 KB · Views: 31
-
00E0E_kyiMazQoAOK_1200x900.jpg106.4 KB · Views: 30
-
00i0i_eezX7AKp9uA_1200x900.jpg86.3 KB · Views: 29
-
00Y0Y_fNEflbLlYVh_1200x900.jpg94.2 KB · Views: 29
-
00606_fMFj1N6IQt7_1200x900.jpg98.3 KB · Views: 27
-
00303_k6ewIRnuWfg_1200x900.jpg88.4 KB · Views: 27