Hello I am selling a very nice Jonsered that has been ported and polished. The work is not extreme so it works great and runs very nicely on 93 pump gas 50 to 1 mix. The ignition timing was increased by 5 degrees. The exhaust was widened not raise also the intake was widened slightly. Lastly the transfer ports were gasket matched. There are two videos one with the stock muffer with two ports and one with a muffler that some call a "shot gun style" with double ports and small extension pipes. It seems like the mufflers did not make much difference in cutting speed. It just seemed louder, it hurt my ears through the 3m ear-muffs! Let me know what everyone thinks. I will throw in the muffler if someone wants it. This saw is in overall great shape. I'm fairly certain it has the original 24 inch bar. The piston is a meteor and the cylinder is factory. The compression of this saw has been left alone. It still has the base gasket. It makes 150 psi of compression which could be increased if you wanted to do so. The motor has been vacuum and pressure tested. I used the saw for a few days to break it in. It runs awesome and is blast to chop logs with!! Feel free to ask any questions. Thank You
I am asking $650 plus shipping my zip is 06751 that's Connecticut for a shipping reference.
