• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Ported Poly flywheel 066 and a 660

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Big_Wood

westcoast dweller
Joined
Dec 11, 2012
Messages
7,335
Reaction score
8,781
Location
Canuckistan
Looking to unload a few saws I decided I won't be needing. I'll let pics do the talking but first it will be seen that they have my name on the plastics and front of case engraved with my initials. The plastics clean off which is did one but ran out of goof off. Will get more today to finish the other. The engraving in the case was to make sure they didn't walk out of camp with someone they didn't belong too. It could be filled and touched up to be hardly noticeable which I might do if I get time before they sell. Both 100% OEM west coast models. The 066 had a stripped plug hole which was repaired correctly with a helicoil. Not on a new angle like many I've seen lol anyways, judging by what other saws are going for beat and not even being west coast models I'm asking $700 for the 066 and $900 for the 660 shipped both are ported by walkers, mufflers done by me, HD2 filters, and completely gone through. Also have the large west coast 661 dawgs. I have some OEM sets and 4 point pro safety sets if a guy prefers them.
To Canadian buyers, i am interested in trades for firearms. i guess to american buyers as well but you pay the importation with irunguns.com. 660 is up first in the pics after one of them together. These saws made it out to camp but never on the hill cause I was running my 461 instead.

36594d74e33e601aaab650a528f62014.jpg


a57eb902af7f60cd0a7755908ea9695d.jpg


b8a697cd6d29485ae65f0a4aff227f4d.jpg


f352f113d4d2eb5667e080d74649eb02.jpg


57e4671a4267bcf9b85fb976abf3ee7f.jpg


eed39fbb4f05afaea842bb8c76bd7628.jpg


592c1375f8ca910277096685444c8406.jpg


301a69fb2526fd54cf5a72282f2f560b.jpg


55ec2db4d75a696ef0ff4cd3cab59335.jpg


f934185288ccb6b50190dfbcdf981a41.jpg


1492fc1f22498a08540789b4554903d9.jpg
 
Looking to unload a few saws I decided I won't be needing. I'll let pics do the talking but first it will be seen that they have my name on the plastics and front of case engraved with my initials. The plastics clean off which is did one but ran out of goof off. Will get more today to finish the other. The engraving in the case was to make sure they didn't walk out of camp with someone they didn't belong too. It could be filled and touched up to be hardly noticeable which I might do if I get time before they sell. Both 100% OEM west coast models. The 066 had a stripped plug hole which was repaired correctly with a helicoil. Not on a new angle like many I've seen lol anyways, judging by what other saws are going for beat and not even being west coast models I'm asking $700 for the 066 and $900 for the 660 shipped both are ported by walkers, mufflers done by me, HD2 filters, and completely gone through. Also have the large west coast 661 dawgs. I have some OEM sets and 4 point pro safety sets if a guy prefers them.
To Canadian buyers, i am interested in trades for firearms. i guess to american buyers as well but you pay the importation with irunguns.com. 660 is up first in the pics after one of them together. These saws made it out to camp but never on the hill cause I was running my 461 instead.

36594d74e33e601aaab650a528f62014.jpg


a57eb902af7f60cd0a7755908ea9695d.jpg


b8a697cd6d29485ae65f0a4aff227f4d.jpg


f352f113d4d2eb5667e080d74649eb02.jpg


57e4671a4267bcf9b85fb976abf3ee7f.jpg


eed39fbb4f05afaea842bb8c76bd7628.jpg


592c1375f8ca910277096685444c8406.jpg


301a69fb2526fd54cf5a72282f2f560b.jpg


55ec2db4d75a696ef0ff4cd3cab59335.jpg


f934185288ccb6b50190dfbcdf981a41.jpg


1492fc1f22498a08540789b4554903d9.jpg
Wow dude, those are dandy work saws! Way off topic but how you like the 461
 
oh and by the way, they will have OEM decomps installed in them. christmas time boys, tell the wife this is all you need. tree's tip over with these around. drive through the roads with one of these in the back of the truck and behind you will be a clear cut :D
 
Why new decomps? Do you just plug the holes on the saws you use?

I plug all the decomps on the saws I build. Unless a customer specifically asks for a decomp I plug them. One less thing to worry about. Once you get the feel for them a 066/660 with 185-190 psi doesn't need a decomp. I can't speak for the OP but I will say these are beauty's and a ported 066 or 660 done right will smoke a stock 660. GLWS. Somebody is gonna be happy with these for sure.


Sent from my iPhone using Tapatalk
 
Why new decomps? Do you just plug the holes on the saws you use?

the decomps are original to the saws. i plug them to use in the bush because i have seen to many stihl decomps drop into the combustion chamber. one less thing to worry about. regardless, these top ends have a decomp now.
 
I agree , great saws. There are many posts here about a ported 066. I asked about the decomps because the OP runs a lot of saws and it appears he does not use them. I am considering plugging them on two of my saws.
 
I agree , great saws. There are many posts here about a ported 066. I asked about the decomps because the OP runs a lot of saws and it appears he does not use them. I am considering plugging them on two of my saws.

i might have drank to much but it appears gobig posted after me going by the time but is post shows before mine lol. am i trip'n? lol these saws are significantly better then stock and these saws were not actually used by me besides a few loads of firewood. i bought them locally for good money cause i was set on stihl. after running the 461 i decided again (after many prior attempts to give them a chance) that the handlebar is not my cup of tea. i also strongly prefer the husky AV. this may not matter to most but long days on the saw requires some good AV. i plug the decomp on all my work saws. honestly have never seen one of the side mount husky decomps leak but have seen to many combustion chamber decomps leak or fall apart. i suggest to anyone with a combustion chamber decomp saw, run OEM decomp if you need them or plug them! do not trust AM decomps!!!!!!!
 
The 461 was good. I like the way it runs. Can't get over the handlebar and the AV though. Prefer husky for those reasons. Hard to sell the 660's but I wanna get a new hunting rifle without the woman noticing lol
Ahhhh yes sir I'm following you there, slide of fundages trick. I want tuh get a 461 and have hotsaw lol work out his insane-o port job on it, they turn I to a whole differnt breed of critters
 
oh no my bad, i made sense of it now lol gobig posted 56 minutes ago and i posted 48 min ago. i just didn't see his post.
 
I was impressed by a stock 461 but it was running a 20" bar with skip chain filed back to nubs. That chain cut like nothing I have ever seen.

Nice saws!
 
ok guys, i've decided to keep the 660. i do have something i want to do for someone for christmas and i don't know how i want to go about it. i would keep the 066 as well but i've decided to let it go in hopes to make some extra money to help one of the wifes friends out. she's had it rough when it comes to employment and is only getting 3 hrs a day. just enough to pay the bills. i'm normally a prick and don't care about many people but i feel bad for her because she has 3 kids and there christmas is not looking good. i've purchased a few gifts for them myself but i would like to give her some money to shop for her kids and get a tree setup in her living room. i'm gonna give her $500 from the saw if it sells. gonna go get a tree tomorrow. i would setup a raffle but i don't think there is enough time nor do i even know how to do it. this is 100% legit. in all my for sale adds i've never done this. not laying any kinda guilt trip on anyone. it's just something i want to do for someone in need.
 

Latest posts

Back
Top