Want to Sell Poulan AO41 mount bars

[fastLeo151]

Three 76dl 3/8.050 ao41 mount bars one has been used a little, the other two just have shelf wear. The rails are still painted.
35.00 each

I have two 16" 3/8.050 replaceable sprocket tip that are new.
45.00 each

I also have a 20" 3/8.050 not pictured.

 

[daryng]

do you know the DL count for the 16" bars? typically 59 or 60.

 

[fastLeo151]

Hmmm, I want to say 60dl. But I don't know 100%. I have too many 22" bars to use first. So I've never ran these 16" that I have.

 

[daryng]

ok, I'm working on a couple smaller saws so I might be interested in the pair. I'll PM you here in a little bit. thanks

 

[RedneckChainsawRepair]

16" = full size 3/8 050 60 drive link in these bars. K041 mount too.

 

[fastLeo151]

16" = full size 3/8 050 60 drive link in these bars. K041 mount too.

Thanks bud!

 

[fastLeo151]

ok, I'm working on a couple smaller saws so I might be interested in the pair. I'll PM you here in a little bit. thanks

K095 bars will work for you with a little mod fwiw.

 

[daryng]

there is minimal difference between A041 and K095. I've made them work on either. I once reworked a large husky to fit a small mount. PM sent