Poulan flywheel

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hungrybare

ArboristSite Member
Joined
Aug 22, 2009
Messages
91
Reaction score
19
Location
wisconsin
I’ve got a Poulan 295 pro with no spark and I think the flywheel is to blame . I replaced the coil and disconnected the kill switch and still no spark. The flywheel has three magnets and the center one has good magnetism and the two outside ones have hardly none. I’m pretty sure they are all supposed to be the same. Kinda unusual for a flywheel to go bad. If only see one or two over the years so I just thought I’d see what you guys think. THANX !!!
 
I always gap coils with a business card , the kill switch is plastic so I disconnected both wires , one from the coil and the other goes to ground,
 
Thanx JJ, this one I can lift the flywheel off the bench with the middle one, but the two outside ones won’t even lift the small screwdriver
 

Latest posts

Back
Top