• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade Poulan S6000 for Milling Saw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MNewberger

Magnesium Recycler
Joined
Oct 29, 2016
Messages
59
Reaction score
27
Location
Minnesota
I purchased a Poulan S6000 for some light milling work but I have been told it may be somewhat sacreligious to work this old gal so hard. So therefore, I would like to see if anybody would like to trade for a proper milling saw. (Stihl 066/660, Stihl 088/880, Husqvarna 394/395XP, so on)

It is not a perfect saw. It was engraved by the original owner and is missing the original kill switch, felling dawgs and choke rod. But I consider it to be in very good condition for its age.
IMG_20161221_160927476.jpg IMG_20170117_184736.jpg
 
Back
Top