ArboristSite.com Sponsors


Poulan thread

Goinwheelin

Goinwheelin

Clandestine Saw Operations
Joined
Oct 13, 2019
Messages
399
Age
41
Location
Yakivegas.
The seals I pulled from the 5200 are NOK seals. Made in Singapore Part # AB7620E

Unfortunately so far I’ve been unable to find a cross reference or anything for that matter. I checked the crank with calipers and it measured .668 that’s pretty close to 17mm.
 
hotshot

hotshot

ArboristSite Operative
Joined
Apr 11, 2009
Messages
2,413
Location
Midwest
View attachment 800647
These were the seals recommended on this forum for the 4200 I have. The original one is quite abit larger id than the new, the new ones fit but boy it was tight? Are you guys using the same ones?
No, those are the wrong size for a 17mm shaft & keep being recommended. The OEM seals are still available.
 
95custmz

95custmz

ArboristSite Guru
Joined
Jun 18, 2014
Messages
961
Age
51
Location
Plainfield, IN
Hey guys, been cleaning up a Craftsman 3.8. Need a new Walbro carb. The number on the carb is 21-245-4-2. I've been searching the net and not having any luck. Anyone know of a good replacement carb?
 
Maintenance supervisor

Maintenance supervisor

Every 100yrs, All new people...
Joined
Feb 1, 2019
Messages
991
Location
South Carolina
No, those are the wrong size for a 17mm shaft & keep being recommended. The OEM seals are still available.
I'm definitely going to use oem now , far too much should've could've BS with seals, if the oem are available for the 4200 seals I don't know why there would be other recommendations for others?
 
green lust

green lust

ArboristSite Member
Joined
Jul 25, 2018
Messages
79
Location
North Augusta SC
I’ve got this 5.2 craftsman that has a extra large hole in the clutch cover where the stud comes thru .I thought about an oversized washer . What are my options for this to perform well . I’m not really into looks I just want it to work. 56878EE1-01B1-4586-AE18-4DD8E8DB5E78.jpeg 25B6445B-7A1B-4715-8FAE-1B226DB36D74.jpeg
 
95custmz

95custmz

ArboristSite Guru
Joined
Jun 18, 2014
Messages
961
Age
51
Location
Plainfield, IN
I’ve got this 5.2 craftsman that has a extra large hole in the clutch cover where the stud comes thru .I thought about an oversized washer . What are my options for this to perform well . I’m not really into looks I just want it to work. View attachment 800726 View attachment 800727
How about an aluminum plate with two holes? That would probably work better than steel, since the aluminum is softer and wouldn't crack the cover.
 
Goinwheelin

Goinwheelin

Clandestine Saw Operations
Joined
Oct 13, 2019
Messages
399
Age
41
Location
Yakivegas.
I’ve got this 5.2 craftsman that has a extra large hole in the clutch cover where the stud comes thru .I thought about an oversized washer . What are my options for this to perform well . I’m not really into looks I just want it to work. View attachment 800726 View attachment 800727
I could make you a bushing to fit in there if you give dimensions. Or you can grind a washer that fits in that hole then put another washer on top.

or just send it to me I’ll pay shipping :)
 
Top