ArboristSite.com Sponsors
 
 


Rayco RG50 will not start.

Discussion in 'Large Equipment' started by Ncdave, Feb 7, 2019.

?

If I were to replace this machine, with which should other machine should I replace it?

  1. Carlton

    2 vote(s)
    100.0%
  2. Vermeer

    0 vote(s)
    0.0%
  3. ??

    0 vote(s)
    0.0%
Multiple votes are allowed.
  1. Ncdave

    Ncdave ArboristSite Lurker

    Joined:
    Nov 25, 2018
    Messages:
    16
    Likes Received:
    1
    Location:
    North Carolina
    I put them back on exactly as they came off, did proper startup, when I got to high gear it swings up and down great, noticed it's working backwards with the lever, where I used to push the lever to swing away and pull it to swing towards me it is now opposite. It swung to away okay but swung back only halfway and then started drifting back to the away side. I noticed a small drip coming from the front connect on the cylinder on the operator side. I tried doing the startup twice and it has happened the both each time, now the cutter seems stuck in the middle and won't budge when pushed...
     
  2. Eq Broker

    Eq Broker GlobalEquip

    Joined:
    May 5, 2009
    Messages:
    574
    Likes Received:
    98
    Location:
    Marietta
    Did you reverse the hoses by chance?
     
  3. Ncdave

    Ncdave ArboristSite Lurker

    Joined:
    Nov 25, 2018
    Messages:
    16
    Likes Received:
    1
    Location:
    North Carolina
    Sure did! Haha

    Thanks for all your help!!
     

Share This Page