Want to Sell red saw sold buy my Poulan Pro 330

[Tpagel]

Trying to move more saws I didn't need but bought anyway and don't use.

Nice 330 pro has no brake band or spring but runs great and starts easy.
Rebuilt by previous owner oem.
I was told he repaired the case but I can't find it. He was a retired snow machine/ motorcycle mechanic and my better so just wanted to be up front.
I ran a tank of gas and never an issue other than a stock 54cc saw with a 22" bar. ..

120 plus shipping bar and chain or PHO it's your dime.

Next Jonsered 630

Got it from member in trade already running. I ordered oil cap and cleaned a very grimy saw. Tuned and ran a tank.
Cylinder clean and runs and oils well
Has a half ass muffler mod from somewhere down the line and a crack in top cover.
Would make a nice firewood beater.

150 plus shipping for PHO obo

Sent from my SM-J327V using Tapatalk

 

[Kensie1988]

Good prices here, good luck with your sale!

 

[Boomer 87]

The red head did clean up nice

 

[Tpagel]

The last owner neglected it and left it grimy and nasty.
That is probably why his other Jonsered won't run right.

The red head did clean up nice

Sent from my SM-J327V using Tapatalk

 

[Boomer 87]

Thats highly improbable

 

[Tpagel]

Thats highly improbable

Bad Jonsered Juju

Sent from my SM-J327V using Tapatalk

 

[Tpagel]

630 is sold

Sent from my SM-J327V using Tapatalk

 

[Tpagel]

Bump for the 330

Sent from my SM-J327V using Tapatalk

 

[fkssport]

friends please help, I bought a saw POULAN 330 pro, rayuotaet like a beast, but the oil has stopped going, there is no spare parts in Russia, from the USA I ordered an oil pump, but there is no guide plate on my saw yet. Help me find it?????

 

[fkssport]

?????

 

[scottr]

friends please help, I bought a saw POULAN 330 pro, rayuotaet like a beast, but the oil has stopped going, there is no spare parts in Russia, from the USA I ordered an oil pump, but there is no guide plate on my saw yet. Help me find it?????

Hey fkssport , my PP330 does not have a bar plate . Poulan did not make one for this saw . If you google 'poulan pro 330 ipl' you can see that no bar plate is used .

Scott

 

[fkssport]

thank you!!! tell me is there an analog of this saw? I can't find any spare parts.

 

[fkssport]

https://www.ebay.com/itm/Poulan-Pro-581562403-18-Chainsaw-Guide-Bar-Chain-Combo-/233300936684
tell me this chain and tire will fit on the poulan 330 pro??

 

[scottr]

https://www.ebay.com/itm/Poulan-Pro-581562403-18-Chainsaw-Guide-Bar-Chain-Combo-/233300936684
tell me this chain and tire will fit on the poulan 330 pro??

That bar and chain is for the smaller 42 cc saws . It is a 3/8" low profile bar and chain .
Did you look up the illustrated parts list (ipl) for your PP330 ?

If you go to www.oregonproducts.com to look up a 18" bar and chain for your saw . It probably needs a new drive rim or sprocket too .

Now my question for you is what is a rayuotaet ?

Scott

 

[fkssport]

rayuotaet - Typo, wanted to write works well. I translate with a dictionary translator. Help me buy a tire and chain for my saw on eBay. otherwise, I will definitely buy none that you need, please. Catalog looked thank you very much.

 

[scottr]

rayuotaet - Typo, wanted to write works well. I translate with a dictionary translator. Help me buy a tire and chain for my saw on eBay. otherwise, I will definitely buy none that you need, please. Catalog looked thank you very much.

Your saw uses a K041 bar mount and a 3/8" pitch chain . Try searching for 18" K041 bar and chain . Have you looked at the drive sprocket or drive rim to see if it is worn out ?
Do you have a husqvarna dealer near you , they also sell oregon products ?

Scott

 

[fkssport]

the star is in good condition. thank you very much for your advice.

 

[scottr]

the star is in good condition. thank you very much for your advice.

Check your private messages .

 

[fkssport]

Friends, finally arrived my oil pump and tire with chain. Everything is installed, everything works. Thank you to everyone who helped.

 

[fkssport]