RPM (tuning w/a tach)

[White Lightning]

Hi All-

I'm a bit of a lurker, but I am going to de-lurk and ask a question.

So, I've graduated to tuning with a tach. It SEEMS the easiest base way of tuning with a tach is gett'er running near what feels good, then double check, and do again. BUT, it seems the extremes are pretty set in stone (on stock-ish saws). Aim for an idle of 2700s and then "book" value for max, outta wood...

SO, my question is, what is the right 3 second max out of wood for the following:

200t
Muff modded 361
Dual port muff 660
and since I'm asking ht131

Thank you in advance,
WL

re-lurk.

 

[computeruser]

13k +/- for the 066 should do ya well. Not sure about the others.

 

[White Lightning]

13k +/- for the 066 should do ya well. Not sure about the others.

Thank you. One down....

For such an active forum, I am surprised that I don't have 101 dalmatians. No. Wait. 101 answers.

Again, thank you for the reply.

WL.