• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


Sachs Dolmar Chainsaws Thread

DirtyHippo

DirtyHippo

ArboristSite Lurker
Joined
Mar 16, 2019
Messages
30
Location
Quesnel, BC, CAN
Its the only one I have ever seen online for the 119, what parts are you looking for or is it just info you need?
I am looking for parts as well as info. For the 119 I need an air filter, chain break spring assembly, carb and muffler. I have been fortunate enough to find a guy who is not too far away that had a few other parts I needed but the carb he had was for a 115 and doesn't have the same size butterfly
 
pioneerguy600

pioneerguy600

Lost in Space
Staff member
Joined
Dec 23, 2007
Messages
39,820
Location
N.S. Canada
That is often the way it goes. contact Scott directly, he has hundreds of saws and parts he does not have listed. I know of several other sellers, will see if I can find a link.
 
blk05crew

blk05crew

I like 'em green
Joined
Aug 26, 2014
Messages
1,889
Age
38
Location
Eastern WA
Hey all, I’m looking for a coil and plug wire for a Poulan s6000 still (Dolmar 153), anyone know if they are available anywhere or does anyone have an extra? Here is a pic of the one I need to replace. Thanks!

FA04BDE9-17E2-4588-A480-80FB2A727FC4.jpeg
 
Rehnny

Rehnny

New Member
Joined
Apr 22, 2019
Messages
2
Age
30
Location
australia
hey how are ya. just signed up to the site hoping to get some info. i just acquired a dolmar made mcculloch (pro mac 6800 I'm pretty sure) but it was run over and has snapped the handle and busted the tank. i was wondering if anyone knows which dolmar would be the same for replacement parts as i can't find any mcculloch parts for it.
thanks in advance
 
Kanscruzer
Joined
Mar 11, 2009
Messages
123
Age
61
Location
Kansas City
hey how are ya. just signed up to the site hoping to get some info. i just acquired a dolmar made mcculloch (pro mac 6800 I'm pretty sure) but it was run over and has snapped the handle and busted the tank. i was wondering if anyone knows which dolmar would be the same for replacement parts as i can't find any mcculloch parts for it.
thanks in advance
116si ,120 si, dolmar 6000i & 6800i
 
Kanscruzer
Joined
Mar 11, 2009
Messages
123
Age
61
Location
Kansas City
Hey all, I’m looking for a coil and plug wire for a Poulan s6000 still (Dolmar 153), anyone know if they are available anywhere or does anyone have an extra? Here is a pic of the one I need to replace. Thanks!

View attachment 724535
Look up Bosch ignition for Dolmar 123/133, 120 S, Husqvarna 285,298,2100,2101, Stihl 041,045,056. That's a starting point there are several others. worst case will be plug wire being short , at which point Husqvarna sell coil wire extension /// or crimp connector, rubber insulation & sealing heat shrink tube
 
Kanscruzer
Joined
Mar 11, 2009
Messages
123
Age
61
Location
Kansas City
Did you read the ad above, I outlined several there, take the ones I listed from there. If it's bosch coil use with Bosch flywheel , If it SEM coil ,GE/GA use Sem that's GE or GA flywheel
 
psuiewalsh

psuiewalsh

Addicted to ArboristSite
Joined
Mar 7, 2011
Messages
2,519
Location
Oxford, PA
hey how are ya. just signed up to the site hoping to get some info. i just acquired a dolmar made mcculloch (pro mac 6800 I'm pretty sure) but it was run over and has snapped the handle and busted the tank. i was wondering if anyone knows which dolmar would be the same for replacement parts as i can't find any mcculloch parts for it.
thanks in advance
Maybe another member would know if the older 2 pc mag tanks would fit that saw so it could be painted yellow or black to match?
 
Top