I have for sale a running Stihl 028 Super that comes with a 20" Stihl bar and safety chain. The saw is mostly complete but does need a new handle/trigger cover and is missing a bar nut. As previously mentioned the saw does run but not very well. Has low compression at 115 psi and also has a small vaccuum leak. Crankcase bearings are still good but still, this saw would be a good candidate for a rebuild. Carburetor could also benefit from a rebuild. Tank assembly is in great shape, no cracks or dings. Handle bar is bent and needs to be replaced. The bar is used but in good shape. As previously mentioned the chain that is currently on the bar is safety chain, it still has quite a bit of life left in it. Crankcase has some scuffed paint and is a little dirty but otherwise is good, no cracks or dings. The plastic has some color fading but otherwise seems good. The end of the ignition coil has some electrical tape on it, not sure what the story is on that but the spark is fine. If you have any questions please shoot me a message anytime. Make me an offer, i'll probably say yes.