• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Stihl 046 chainsaw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tylersummertime

ArboristSite Lurker
Joined
Mar 25, 2018
Messages
39
Reaction score
4
Location
Millersville pa
Here is a good running stihl 046 chainsaw. It has new crankcase bearings new crankcase seals . New meteor piston and new rings . New carb. New intake boot new impulse line new fuel line and fuel filter new spark plug original cylinder and was honed. New clutch new side cover new rear handle. Saw has a 160 compression. I can ship just the power head if you want me to .I am asking 700 bucks free shipping
 

Attachments

  • 20200610_162247.jpg
    20200610_162247.jpg
    1.3 MB · Views: 73
  • 20200610_162256.jpg
    20200610_162256.jpg
    1.2 MB · Views: 75
  • 20200610_155407.jpg
    20200610_155407.jpg
    1 MB · Views: 69
  • 20200610_155323.jpg
    20200610_155323.jpg
    1.2 MB · Views: 70
  • 20200610_155345.jpg
    20200610_155345.jpg
    1.2 MB · Views: 63
  • 20200610_155308.jpg
    20200610_155308.jpg
    1.1 MB · Views: 63
  • 20200609_222431.jpg
    20200609_222431.jpg
    878 KB · Views: 64
  • 20200609_222405.jpg
    20200609_222405.jpg
    980.1 KB · Views: 58
  • 20200609_214219.jpg
    20200609_214219.jpg
    1.2 MB · Views: 55
  • 20200609_214224.jpg
    20200609_214224.jpg
    1.3 MB · Views: 53
Here is a good running stihl 046 chainsaw. It has new crankcase bearings new crankcase seals . New meteor piston and new rings . New carb. New intake boot new impulse line new fuel line and fuel filter new spark plug original cylinder and was honed. New clutch new side cover new rear handle. Saw has a 160 compression. I can ship just the power head if you want me to .I am asking 700 bucks free shipping
folks want to see the saw, include some pics
 
Here are some pics
 

Attachments

  • 20200610_162256.jpg
    20200610_162256.jpg
    1.2 MB · Views: 20
  • 20200610_160859.jpg
    20200610_160859.jpg
    1 MB · Views: 23
  • 20200610_155323.jpg
    20200610_155323.jpg
    1.2 MB · Views: 23
  • 20200610_155345.jpg
    20200610_155345.jpg
    1.2 MB · Views: 21
  • 20200610_120854.jpg
    20200610_120854.jpg
    1.1 MB · Views: 21
  • 20200609_222431.jpg
    20200609_222431.jpg
    878 KB · Views: 21
  • 20200609_222355.jpg
    20200609_222355.jpg
    1 MB · Views: 17
  • 20200609_214219.jpg
    20200609_214219.jpg
    1.2 MB · Views: 18
  • 20200609_214224.jpg
    20200609_214224.jpg
    1.3 MB · Views: 18
Hutzl covers and air filter? You should make sure all the aftermarket parts are listed so the buyer doesn’t end up with a surprise. That’s a lot of money even if the saw was all oem.
I doubt I'd get near that much for my minty all OEM PNW version early D chamber 046 with 28" light bar.
 
Back
Top