Stihl 064 bar size

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ironman_gq

Addicted to ArboristSite
AS Supporting Member.
Joined
Aug 16, 2008
Messages
1,708
Reaction score
754
Location
Iron Range MN
Recently rebuilt and 064 with a Cross big bore kit and am looking to start gathering pieces to put together a milling setup. Would a 36" bar be a good fit for this saw? Would mostly be milling pine but there would likely be the occasional maple or ash in there. Log size would probably max out around 24-28" diameter for either species.
 
i mill with my 064 and run a 32" bar with 3/8 skip chain. had no issues milling sugar maple aprox 24-28". Running skip chain the 8 pin rim i have on it is fine
 
Back
Top