• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade Stihl 064 parts for trade

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dickranch

ArboristSite Lurker
Joined
Jul 15, 2018
Messages
9
Reaction score
0
Location
Wa
I have a few 064 parts that im looking to sell or trade for 066 parts. Parts came from a pretty hammered 064av. Make me an offer and will be shipping from Ellensburg, WA. Or you pickup.

Parts I have 064
Cylinder and piston 1122 good shape
Tank/handle 1122 351 050 decent shape
Flywheel -good shape
Crank -decent shape (bearings were seized but not sloppy)
Both case halves (clutch side is rough but should be usable) 1122 020 2900 & 1122 021 0700
Top cover
Recoil starter (looks rough but works)
I also have a ported 046 cylinder 1128. (Not professionally done but looks usable)

Parts i need 066
Cylinder and piston
Chain brake parts/ handle
Carb
Air filter base and cover
Recoil starter
Clutch/ drum/ sprocket
Probably more that i'm forgetting.
 

Attachments

  • 20180716_063119.jpg
    20180716_063119.jpg
    4.2 MB · Views: 23
  • 20180716_061941.jpg
    20180716_061941.jpg
    2.4 MB · Views: 23
  • 20180716_062526.jpg
    20180716_062526.jpg
    1.3 MB · Views: 24
  • 20180716_061705.jpg
    20180716_061705.jpg
    1.7 MB · Views: 24
  • 20180716_062259.jpg
    20180716_062259.jpg
    2.6 MB · Views: 23
  • 20180716_063528.jpg
    20180716_063528.jpg
    2.1 MB · Views: 21
  • 20180716_062553.jpg
    20180716_062553.jpg
    1.8 MB · Views: 22
  • 20180716_062641.jpg
    20180716_062641.jpg
    1.7 MB · Views: 23
How much for the ported 046 cylinder? What all has been done to it?


Sent from my iPhone using Tapatalk
 
How much for the ported 046 cylinder? What all has been done to it?


Sent from my iPhone using Tapatalk
$50. It was in a bucket of parts that came with my 066. It looks like the intake and exhaust ports were opened up. I dont see any evidence of transfer port work. It almost looks like it was shaved based on the part numbers being lower on the base than i would expect. but i doubt it was.
 
$50. It was in a bucket of parts that came with my 066. It looks like the intake and exhaust ports were opened up. I dont see any evidence of transfer port work. It almost looks like it was shaved based on the part numbers being lower on the base than i would expect. but i doubt it was.
 

Attachments

  • 20180716_061656.jpg
    20180716_061656.jpg
    1.8 MB · Views: 23
  • 20180716_061639.jpg
    20180716_061639.jpg
    1.5 MB · Views: 23
  • 20180716_061634.jpg
    20180716_061634.jpg
    2 MB · Views: 24
$50. It was in a bucket of parts that came with my 066. It looks like the intake and exhaust ports were opened up. I dont see any evidence of transfer port work. It almost looks like it was shaved based on the part numbers being lower on the base than i would expect. but i doubt it was.

If you’ll do $50 shipped I’ll take it. I have a straight gassed ms460, I want to fix
62c8c96769a6269e52749f9388e2b96a.jpg



Sent from my iPhone using Tapatalk
 

Can you check and make sure it’s level, it almost looks like someone cut it on a lathe.


Sent from my iPhone using Tapatalk
 
Will do this afternoon. And i can do $50 shipped unless your ungodly far away.

I’m in MS, I am just worried about the port job someone did. I am still skeptical of how well it will run.
Upon looking closer it looks like a really crappy port job


Sent from my iPhone using Tapatalk
 
I’m in MS, I am just worried about the port job someone did. I am still skeptical of how well it will run.
Upon looking closer it looks like a really crappy port job
Ill
Sent from my iPhone using Tapatalk
Pm sent.
 
Fair enough. Not trying to pawn my junk off on you guys. Figured someone would have a use for it.

Sent from my LGUS997 using Tapatalk
 
Back
Top