• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 066(revised price & details)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

huskyslinger

xp390
Joined
Oct 2, 2014
Messages
824
Reaction score
422
Location
washington state
So where to start, new meteor piston, carb kit, am dual port muffler, am clutch cover. Has new coil and light does work. Got saw in basket case. Runs and oils as it should. Will sell for $575.00 with new bar and chain. Chain will need sharpening. PHO $475. Plus half of shipping to lower 48. Thank you20170909_113959.jpg 20170909_114023.jpg 20170909_114045.jpg 20170909_114059.jpg 20170909_114108.jpg
 
I'm interested in the saw. The pics wont pull up larger for me so i can get a better idea on condition. Can you email them to me? And what is the compression?
 
Ok so I got bad news. This was not the saw I thought. I built over a dozen saws this winter and totally forgot what was done. This makes me look like a fool I'm sorry. It is a thick base 066, there's a couple broken fins and I didn't put a piston in it. It has OEM piston. While doing a final test I notice rpms were dropping. So the info in coil I purchased was wrong! Anyway. With that said I pulled jug, deleted base gasket, installed new caber rings, swapped coil with one that would work, moved flywheel to next position. Drilled inner baffle. Letting it set overnight will fire tomorrow.
 
Back
Top