thewoodlands
ArboristSite Operative
I have a Stihl 310 that starts fine but after about 20 minutes of use will stall out or if you let up on the throttle some after coming out of the cut, it will die out.
I took the muffler off and the piston looks good, any ideas on what could be causing this? The saw is either 10 or 11 years old.
The gas in it is new non ethanol and the gas filter is fairly new (two months old) and the saw goes out clean before being used.
I took the muffler off and the piston looks good, any ideas on what could be causing this? The saw is either 10 or 11 years old.
The gas in it is new non ethanol and the gas filter is fairly new (two months old) and the saw goes out clean before being used.