• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 462cm PHO 875 bucks

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Derrick Sawyer

ArboristSite Guru
Joined
Feb 26, 2013
Messages
516
Reaction score
609
Location
PA
Ladies and Gentlemen, For Sale 462cm PHO Chainsaw
Bought it last year, then did slight modifications, only about 4-5th tank
Clean piston, everything works as it should, ~160psi

Base gasket delete and removed a very small amount from top of cylinder for ~0.02 squish
shaved key on flywheel ~1/3
Marked the clutch cover sight with black marker

Buyer pays shipping, Paypal f/f preferred
 

Attachments

  • 462 pull side.jpg
    462 pull side.jpg
    108.4 KB · Views: 71
  • 462 clutch side.jpg
    462 clutch side.jpg
    109.3 KB · Views: 72
  • 462 front.jpg
    462 front.jpg
    115.6 KB · Views: 71
  • 462 label.jpg
    462 label.jpg
    104.1 KB · Views: 70
  • 462 air filter.jpg
    462 air filter.jpg
    98.5 KB · Views: 70
  • 462 bottom.jpg
    462 bottom.jpg
    100.3 KB · Views: 66
  • 462 piston.jpg
    462 piston.jpg
    424.8 KB · Views: 67
I didn't run the more than a tank before modifying so i can't really tell if there were noticeable gains, plus i dont do any timed cuts or anything. As for the compression i didn't hold the throttle open or really pull a long time to try and get a max compression, so 160 is conservative, but its not going to be super high like the builder here who shave off some off the cylinder base. I think it will also build more compression with another 5 tanks.

Either way saw cuts real strong with 25" bar, and super fast with a 20" bar and real light setup
 
Back
Top