ArboristSite.com Sponsors
 
 


Want to Sell Stihl, Husqvarna, Poulan, Homelite, Remington, Clinton, ETC

Discussion in 'Chainsaws' started by FlyingDutchman, Jul 16, 2019.

  1. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    Prices are OBO, you pay shipping, will do package deals. Some of these will end up for sale locally. Several people locally are flipping homeowner saws, tossing them up here first just for the heck of it.

    I'll be posting pics as I can get them. Hopefully I can continue to edit the primary thread as I get more info and things are sold.

    Stihl 041AV Quickstop 20" 3/8 Cool old saw with chain brake for safe operation, nice bar and chain NOT A SUPER. Doesn't like to start hot after it sits a bit. $200
    IMG_20190716_235907595.jpg IMG_20190716_235854046.jpg IMG_20190716_235831367.jpg

    Stihl 032AV 18" 3/8 good shape, runs an oils with sharp chain but needs the points set, runs rough. Lots of chains avail. Might take to dealer to have them set, price will go up. $150. This was my grandad's saw but I never saw him use it so I'm not too attached. IMG_20190717_000208626.jpg IMG_20190717_000217567.jpg

    Stihl MS290 with AM 390 top end and carb 64CC with a port job, new 20" Total Superbar (Tsumara) bar and new Stihl .325 63ga chain. New Stihl crank seals, bearings, clutch drum, 325 rims, , AM big spikes, 7 and 8 pin rims. Modded Stihl Muffler with new bolts. Good power. Comes with all the Stihl top end, carb, spikes, 3/8 spur drum, which are still in useable shape. The oiler is now recently acting up, debris related I think. $350 if I can fix it.

    *SOLD* Husqvarna 372xp times TWO. One was an X-Torq not assembled, one is a non-X-torq (assembled). These are various parts, some stuff missing, hardware, handles, brake flags. The extra X-torq cylinder is scored. Extra non-Xtorq looks good. One money for all. $200

    Husqvarna 575XP Blown out spark plug hole. Not sure of condition of P&C. Top cover melted a little around plug. Recoil cover has a couple fins broken. Mostly complete. $250. Nice project.

    Husqvarna 340 16" .325 runs great, has new carb from the dealer, new clutch and chain, and lots of work has been done. $120

    *SOLD* Husqvarna 141 16" 3/8 picco Recoil is out of it, New bar and chain, not running. $40.

    Poulan 3314 14", nice starting and running saw. $45

    Poulan 2150 SuperClean Runs great, throttle sticks open, needs a throttle lock plastic piece or a handle. $30

    Poulan 2075 SuperClean Ran last year, rough, $15

    Sears 42cc recent fuel lines, antivibe etc. Runs, but hard starting and other issues. $20

    *Sold* XL-12 (I think) in the older blue paint. No spark. $20

    *SOLD* XL-12 red, missing fuel cap, for parts. $20 IMG_20190916_230546763.jpg IMG_20190916_230557093.jpg IMG_20190916_230615430.jpg

    Homelite XL2, has 1/4" pitch bar and chain could be used for carving. Runs but floods immediately. I might fix this one for carving still. make offer.

    Homelite 240 for parts. Threads stripped on one side of crank, parts missing, basket case. Make offer.

    Remington Super 754. Failed crank bearing or rod. Complete with original sized B&C. $100
    IMG_20190916_230728905.jpg IMG_20190916_230739586.jpg

    Clinton saw, needs restored. Haven't figured out the model yet. $80

    Troy Bilt easy start for parts, broken handle, choke pull etc. Parts missing, basket case. Make offer.

    Skil Top handle complete not running $15

    Frontier Top handle complete not running, $15
     
    cuinrearview likes this.
  2. TLG

    TLG Komatsu Iron Life

    Joined:
    Jan 26, 2010
    Messages:
    407
    Likes Received:
    194
    Location:
    Western Pa.
    Hey Dutchman, Is the Skil Top handle saw modeled after the Poulan 25DA?? If so I may be interested. Can you possibly message me some pic's? Thanks, TLG
     
    chipper1 and FlyingDutchman like this.
  3. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    Two saws sold locally. Pics for Stihls added.

    Package deals on Homelites and Poulan/Sears?

    I'm pretty sure I'm keeping the 575XP. Pretty firm on $250.
     
  4. Hambone

    Hambone Ain’t she pittyful

    Joined:
    Jul 10, 2019
    Messages:
    123
    Likes Received:
    89
    Location:
    St. Louis, Mo.
    Still got both the homelite xl-12?
     
  5. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    I have been looking for the blue Homelite and a couple of other saws. May have walked off. Will let you know.
     
  6. Hambone

    Hambone Ain’t she pittyful

    Joined:
    Jul 10, 2019
    Messages:
    123
    Likes Received:
    89
    Location:
    St. Louis, Mo.
    Thank you
     
  7. Maintenance supervisor

    Maintenance supervisor Every 100yrs, All new people...

    Joined:
    Feb 1, 2019
    Messages:
    631
    Likes Received:
    710
    Location:
    South Carolina
    Still have the Remington? Is the p/ c ok?
     
  8. Huskybill

    Huskybill Addicted to ArboristSite

    Joined:
    May 21, 2018
    Messages:
    3,969
    Likes Received:
    3,012
    Location:
    Northeast
    The husky 340? Older 340se? Or newer one?
     
  9. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    After working on my truck for 2 months solid, and making a space to photograph in again, I now have the time to do this and respond appropriately to people on this. Sorry about the delay.

    Huskybill, it does not say SE on it. Pics on all of them soon. Still unable to find a couple of the saws but hopefully they show up.
     
  10. svk

    svk A little bit of everything

    Joined:
    Oct 19, 2009
    Messages:
    21,702
    Likes Received:
    55,852
    Location:
    MN
    I might be interested in the 340 if Huskybill didn’t take it. Could you posts pics when you have a minute.
     
    chipper1 likes this.
  11. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    Updates, I'm out of pictures I can upload to the original thread. I had a couple good run ins trying to sell locally, and a couple bad ones, frustrating. The truck also broke again. Which is sweet.

    The 340 is a very strong runner, quite fuel efficient too, nasty little limber, you definitely need a break by the time it runs out! But leaves a large puddle of bar oil after use. The previous owner said it did that too, so I'm trying to figure that out, unless you guys don't care. I feel like I'd rather sell my CS400 and run this instead.

    The Skil top handle will run with a fuel prime.
     
  12. Allen K

    Allen K Chainsaw Addict

    Joined:
    Jan 23, 2016
    Messages:
    97
    Likes Received:
    258
    Location:
    Millersville
    I’d be interested in the Homelite XL12’s if they’re still available.


    Sent from my iPhone using Tapatalk
     
  13. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    Yes available. Please PM me your zip for a shipping estimate.

    Maintenance supervisor, I'm also working on yours. Thanks.
     
  14. Allen K

    Allen K Chainsaw Addict

    Joined:
    Jan 23, 2016
    Messages:
    97
    Likes Received:
    258
    Location:
    Millersville
    Pm sent


    Sent from my iPhone using Tapatalk
     
    FlyingDutchman likes this.
  15. FlyingDutchman

    FlyingDutchman Row Seatin'

    Joined:
    Apr 24, 2009
    Messages:
    652
    Likes Received:
    405
    Location:
    Scales Mound, IL
    Homelite xls have a new home, pending payment.

    340 is being used as a loaner saw to the PO.

    The big bore ms290 now has kinks worked out, runs great and oils fine. I've run another 6 tanks through it and it's rock solid.

    I'm prepared to ship quickly now after a few personal issues have gotten in the way. I appreciate everyone's patience. With that in mind I am more open to offers.
     

Share This Page