• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl, Husqvarna, Poulan, Homelite, Remington, Clinton, ETC

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 25, 2009
Messages
1,078
Reaction score
779
Location
Illinois
Prices are OBO, you pay shipping, will do package deals. Some of these will end up for sale locally. Several people locally are flipping homeowner saws, tossing them up here first just for the heck of it.

I'll be posting pics as I can get them. Hopefully I can continue to edit the primary thread as I get more info and things are sold.

Stihl 041AV Quickstop 20" 3/8 Cool old saw with chain brake for safe operation, nice bar and chain NOT A SUPER. Doesn't like to start hot after it sits a bit. $200
IMG_20190716_235907595.jpg IMG_20190716_235854046.jpg IMG_20190716_235831367.jpg

Stihl 032AV 18" 3/8 good shape, runs an oils with sharp chain but needs the points set, runs rough. Lots of chains avail. Might take to dealer to have them set, price will go up. $150. This was my grandad's saw but I never saw him use it so I'm not too attached.IMG_20190717_000208626.jpg IMG_20190717_000217567.jpg

Stihl MS290 with AM 390 top end and carb 64CC with a port job, new 20" Total Superbar (Tsumara) bar and new Stihl .325 63ga chain. New Stihl crank seals, bearings, clutch drum, 325 rims, , AM big spikes, 7 and 8 pin rims. Modded Stihl Muffler with new bolts. Good power. Comes with all the Stihl top end, carb, spikes, 3/8 spur drum, which are still in useable shape. The oiler is now recently acting up, debris related I think. $350 if I can fix it.

*SOLD* Husqvarna 372xp times TWO. One was an X-Torq not assembled, one is a non-X-torq (assembled). These are various parts, some stuff missing, hardware, handles, brake flags. The extra X-torq cylinder is scored. Extra non-Xtorq looks good. One money for all. $200

Husqvarna 575XP Blown out spark plug hole. Not sure of condition of P&C. Top cover melted a little around plug. Recoil cover has a couple fins broken. Mostly complete. $250. Nice project.

Husqvarna 340 16" .325 runs great, has new carb from the dealer, new clutch and chain, and lots of work has been done. $120

*SOLD* Husqvarna 141 16" 3/8 picco Recoil is out of it, New bar and chain, not running. $40.

Poulan 3314 14", nice starting and running saw. $45

Poulan 2150 SuperClean Runs great, throttle sticks open, needs a throttle lock plastic piece or a handle. $30

Poulan 2075 SuperClean Ran last year, rough, $15

Sears 42cc recent fuel lines, antivibe etc. Runs, but hard starting and other issues. $20

*Sold* XL-12 (I think) in the older blue paint. No spark. $20

*SOLD* XL-12 red, missing fuel cap, for parts. $20IMG_20190916_230546763.jpg IMG_20190916_230557093.jpg IMG_20190916_230615430.jpg

Homelite XL2, has 1/4" pitch bar and chain could be used for carving. Runs but floods immediately. I might fix this one for carving still. make offer.

Homelite 240 for parts. Threads stripped on one side of crank, parts missing, basket case. Make offer.

Remington Super 754. Failed crank bearing or rod. Complete with original sized B&C. $100
IMG_20190916_230728905.jpg IMG_20190916_230739586.jpg

Clinton saw, needs restored. Haven't figured out the model yet. $80

Troy Bilt easy start for parts, broken handle, choke pull etc. Parts missing, basket case. Make offer.

Skil Top handle complete not running $15

Frontier Top handle complete not running, $15
 
After working on my truck for 2 months solid, and making a space to photograph in again, I now have the time to do this and respond appropriately to people on this. Sorry about the delay.

Huskybill, it does not say SE on it. Pics on all of them soon. Still unable to find a couple of the saws but hopefully they show up.
 
Updates, I'm out of pictures I can upload to the original thread. I had a couple good run ins trying to sell locally, and a couple bad ones, frustrating. The truck also broke again. Which is sweet.

The 340 is a very strong runner, quite fuel efficient too, nasty little limber, you definitely need a break by the time it runs out! But leaves a large puddle of bar oil after use. The previous owner said it did that too, so I'm trying to figure that out, unless you guys don't care. I feel like I'd rather sell my CS400 and run this instead.

The Skil top handle will run with a fuel prime.
 
I’d be interested in the Homelite XL12’s if they’re still available.


Sent from my iPhone using Tapatalk
 
Homelite xls have a new home, pending payment.

340 is being used as a loaner saw to the PO.

The big bore ms290 now has kinks worked out, runs great and oils fine. I've run another 6 tanks through it and it's rock solid.

I'm prepared to ship quickly now after a few personal issues have gotten in the way. I appreciate everyone's patience. With that in mind I am more open to offers.
 
Back
Top